Nilight 10009W NI-WA05 LED Light Bar Wiring Harness Kit 12V On/Off Switch Power Relay Blade Fuse for Off-Road LED Work Light Bar with 2-Year Warranty Review

Overall this is a great set. Do yourself a favor and get better cable connectors. And use regular heat shrink tubing because I don't think they shrink very well. Especially when working with thin wire they don't work. I used them to connect high beam headlights on my motorcycle.

Easy to install and works great with the lightbar I purchased. I only needed one connection point, so I just closed the second set. The only downside for me is that my battery is on the passenger side so I had to add some wire to get the switch where I wanted in the cockpit. Otherwise I'm very happy with it overall.

this will not work on a full size dump truck. everything else was long enough, but the wire between the two headlights was about 2 feet shorter to go from pole to pole. also can't go from fog light to fog light. Make sure you check your dimensions between lights or you're dealing with an unnecessary connection. The wiring and sheathing are of good quality, as is the switch. The time is displayed on the relay.

I bought the same company together with high beam. Installation and connection is much easier than buying a wire bundle and relay separately. The only complaint is that the way it's done is a bit odd. It is mounted in such a way that the power source (battery) and the toggle switch must be on the same side of the truck. Mine has it reversed, so I had to extend a wire or two to make it work. However, installation just got a lot easier now!

My friend was worried that he forgot to turn off the backlight. It has automatic headlights, so I suggested this suspension. We dropped the button and connected the trigger wire (white) from the relay to the positive side of his parking lights. If he doesn't turn on the headlights manually and ignores turning on the headlights with the ignition off, he no longer has to worry. A nice side effect is that if he opens the car with the key fob, his car will greet him with a backlight.

because it was so much work to install. The supplied brackets were incredibly difficult to align. Those are tiny screws. strange for such use of the car. The cable package must be ordered for this dual light function. Otherwise the wiring can drive you crazy. I recommend cable assembly. I need to buy another set so I have white lights instead of just yellow ones. But they are quite bright when working.

I bought this product thinking it would save me time and effort compared to making my own suspension. I installed this product on an ATV and didn't have a chance to get it out of the garage before the derailleur fell apart. Unfortunately, the switch that came with this harness became corroded and failed within a month of installation. This forced me to remove the switch, clean it and restore it as best as I could. I would simply replace the derailleur with a higher quality product, but I…

I bought this wiring harness to install a 20w 12v led light bar I bought from Revain a while back, and finally found the time to install them. All in all it took me about 1 hour and 30 minutes to get everything done but about 20 minutes of that was spent trying to figure out the best way to connect it and the wires with the smallest area and more importantly the easiest to embarrassed way to do it. First I installed the light on the roof of my truck as there were already two factory holes that…