NZXT H210: Mini-ITX PC Gaming Case with USB Type-C, Tempered Glass, and Water-Cooling Ready - Black Review

My first mini-ITX build and I really like it. I bought the matte black 210iAirflow which is great as a 240mm radiator in the front keeps my 8700k cool. The tempered glass side panel is very strong and holds very securely. Admittedly I freaked out thinking the glass would break, but so far it's holding up. The only thing I can think of negatively is that the screw tolerances are extremely tight and the texture is like sandpaper and shows where you've touched, but get a microfiber cloth it's not…

I used it with a Phantom x570 ITX board. Some things to consider. This case has a solid chassis and cable routing is generally good. There may be some issues with the clearance between the top fan and the CPU cooler. I had to modify the clip that attached the fan to the CPU cooler to make it work. There is very little space between the mainboard and the top of the case, where it makes sense to route an 8-pin connector. This is a small form factor case, so some of that is to be expected and much

Bought this case for my first mini-ITX build. The first thing to note is that this case is the size of a Micro-ATX. If you want something that's a fraction of an inch larger but has more PCI-E slots, get a micro-ATX case from another manufacturer. At the same time, the cable routing slots on the back make cable management much easier. The gap for the graphics card leaves a lot to be desired. I may have to cut into the case to fit the RTX 3080, so I just want to get a different case. The…

This is my first "modern" style cabinet I've built. The last case I used is probably 10-15 years old and let me tell you, gone are the days of ugly interiors and sharp edges. There are cable guides on the back of the case and the case has been designed to hide the motherboard cables as much as possible. It fits into a full-size power supply (ATX) and has enough space to hide cables from a non-modular power supply. Airflow is good if you don't use the NZXT fans. While they're quiet, they're…

Overall great case. Well packaged and arrived undamaged. Features USB 3.2 and Type-C ports at the top next to the power button. The cable routing is very well thought out in this case, particularly with channels to route cables with Velcro to hold them. The tempered glass side panel adds a nice touch if you want the innards to show. I have replaced the (2) included 120mm fans with two white LED fans. Everything you need is included in the accessory kit. It has an audio adapter "dad" for two…

Performance construction. a really good case if you are looking for an ITX with some headroom. Easily built-in and small enough to be hidden or displayed without taking up space. Thermals seem solid so far, with little effort in fan curves. PROS: The Kraken x53 fits forward nicely in a push-pull configuration, and I was able to move it enough to run the tubes through the center brace. There's plenty of basement, and if you have a demanding GPU, using an SFX power supply will ensure adequate…

If I could give this case 10 stars I would have no hesitation in giving it. I'm a seasoned systems engineer by trade, so I'm pretty critical of enclosures. This one is almost perfect! The build quality is excellent, the built-in fan/RGB header is very convenient, and the software to control it is well designed. This is also the size of the Goldilocks case. Not too big, but big enough that it doesn't hurt when working. Full-size graphics cards fit in with no problem. Cable management is…