Header banner
Revain logoHome Page
🔌 30cm/1ft 16 pin j1962 obd2 obd-ii female connector extension cable replacement for open plug wire cord pigtail: car diagnostic accessory logo

🔌 30cm/1ft 16 Pin J1962 OBD2 OBD-II Female Connector Extension Cable Replacement for Open Plug Wire Cord Pigtail: Car Diagnostic Accessory Review

4

·

Very good

Revainrating 4 out of 5  
Rating 
4.0
📊 Diagnostic, Test & Measurement Tools, 🔧 Automotive Tools & Equipment

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔌 30cm/1ft 16 Pin J1962 OBD2 OBD-II Female Connector Extension Cable Replacement for Open Plug Wire Cord Pigtail: Car Diagnostic Accessory
img 2 attached to 🔌 30cm/1ft 16 Pin J1962 OBD2 OBD-II Female Connector Extension Cable Replacement for Open Plug Wire Cord Pigtail: Car Diagnostic Accessory
img 3 attached to 🔌 30cm/1ft 16 Pin J1962 OBD2 OBD-II Female Connector Extension Cable Replacement for Open Plug Wire Cord Pigtail: Car Diagnostic Accessory
img 4 attached to 🔌 30cm/1ft 16 Pin J1962 OBD2 OBD-II Female Connector Extension Cable Replacement for Open Plug Wire Cord Pigtail: Car Diagnostic Accessory

Description of 🔌 30cm/1ft 16 Pin J1962 OBD2 OBD-II Female Connector Extension Cable Replacement for Open Plug Wire Cord Pigtail: Car Diagnostic Accessory

【COMPATIBLITY】 All 16 Pins Connected with different colors wires for different applications, and great for DIY and homemade projects. 【CONNECTION】 16 Pin OBDII J1962 Female Connector, Open Plug Wire. 【PREMIUM QUALITY】 All 16 Pins connected, with high quality, work for your unique project. 【DEMENSION】 Cable Pigtail Length: 30 cm / 12". 【WARRANTY】The 16 Pin extension complies with one year warranty, should be there any question, please don’t hesitate to contact us.

Reviews

Global ratings 4
  • 5
    1
  • 4
    2
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

Documented Not suitable for code readers and scanning tools

Seems to be a good cable but the documentation for the cabling is completely wrong. You will need to hook up a multimeter to determine which wire goes to which pin as half the colors are different from what the documentation says. It's not a big deal to me, but if you want to list the wiring, it's best to be right.

Pros
  • Ideal for outdoor activities
Cons
  • Miscellaneous Miscellaneous

Revainrating 4 out of 5

Pinout would be nice

1 Black - Vendor2 Brown - Bus J1850 +3 Red - Vendor4 Orange - Chassis Ground5 Yellow - Signal Ground6 Green - CAN High7 Blue - K-Line8 Purple - Vendor9 Gray - Vendor10 White - j1850 BUS11 pink - Vendor12 turquoise - Vendor13 black/white - Vendor14 brown/white - CAN low15 red/white - K line low16 green/white - Battery

Pros
  • Great for a small house
Cons
  • Cable shorter than others

Revainrating 3 out of 5

Good product - code readers and scan tools

Sounds like a good connector. But the color codes on the corresponding table do not match the actual color codes. The actual codes are as follows: pen color1 red2 white3 orange4 blue5 green6 yellow7 brown8 purple9 red/white10 white/black11 orange/black12 blue/white13 green/black14 yellow/black15 brown/white16 purple/white

Pros
  • Decent performance
Cons
  • 0

Revainrating 5 out of 5

Be careful with the wiring

The connector itself and the cables appear to be of good quality and fit the mating connector snugly, but my pigtail does NOT conform to the wiring instructions in the product description. I had to check each pin individually to find the correct color wire. Some of the wire colors listed in the chart weren't even on my braid. It seems to work fine as long as you pay attention. It doesn't have an eyelet that attaches it to the plug, but it fits snugly enough that I didn't have to worry about the

Pros
  • Certified
Cons
  • Damaged