Onforu 10M Dimmable LED Strip Light Soft White 3000K, 2835 LEDs 12V Flexible Ribbon Tape Lighting For Under Cabinet, Home Kitchen Bedroom - 32.8Ft Review

Added these as kitchen cabinet accent lighting. Works great, plan on using your own sticky tape and apply every 1ft or so because the adhesive on the strip is basically worthless. I also added my own transformer because the one that comes with it is underpowered IMO. Easy to cut the strip at the cut points and attach angles, extensions, etc.The lights look great ( a true white rather than RGB), and the dimmer lets you set the perfect ambience

This product is super frustrating if you plan to cut the strip to custom sizes and connect them together with led strip connectors.Like many LED strips you can safely cut these every three LEDs. However, if you plan to use any kind of angle connector or join two pieces of LED strip, you cannot cut every three LEDs. Instead, you have to cut on the copper connection points and those alternate every 8" then 12". In my case, this made the LED strip unusable because the connection points are nowhere

I bought this to expand the LED strip light project in my den. However I found this different from my original LE brand strip light in two important ways, one good, one not so good.The plastic strip (on which the LED’s are mounted) is more rigid than the LE strip. This made it very easy to push into the plastic snap connectors. The LE strip is flimsy and collapses, like trying to push a rope.The adhesive on this strip is not the 3M adhesive, but an "ME” adhesive. It is much thinner and less…

I love these lights, the warm color looks great and adds a lot of mood lighting with the dimmer option.the biggest and only draw back is the adhesion, its terrible. I cleaned the area of the upper walls that i was going to be mounting the lights on with rubbing alcohol and a micro fiber cloth, applied even pressure to the light strip and for about the first maybe 7? days it stayed up in place, and then it just went down hill from there very fast.all the lights fell down and wouldn't stay up for

They’re bright and I like them but the adhesive came off not even a full day from installing them. To this day, they still come off after installing the little hooks on some areas not all to keep them from falling. Now, they’re just annoying as we installed them in the closet and they’re falling on the clothes.

We recently moved into a new home and wanted to do some accent lighting in places like the bathroom, kitchen cabinets, and around our entertainment center. I first bought some light strips from Home Depot, but was disappointed when we saw the color. Although they called themselves soft white, they were very harsh, and we felt like we were in a doctor's office.Then, we found these online. Here are a few thoughts:1. Color - The color is warm, but not too yellow. We have soft white (2700K) lights…

These lights will brighten any room. I installed them around the top of my bathroom, shower included, and it really brightens up the room. Imagine full outside light in a bathroom. The adhesion wore off after several months so double sided tape was used to re-adhere, and no problems with droops or pulling away since. The dimmer is a nice feature.

For my first led light strip this was a great purchase. I’m really happy with how easy it was to install and set up. The adhesive seems to be sticking really well to the underside of my wooden desk hutch with no signs of peeling away.The only con is that this doesn’t really look like 3000k white. It’s more yellow than what I’m used to with 3000k led bulbs. It’s super bright and still looks great. But definitely not the color I was hoping for.

Lights are nice and bright considering they are so small. Very thin strip is pliable and easy to get in between shelves.I found the adhesive backing is not the best and it will cause the strip to fall. I overcame it by stapling, but that may not be an option for every use.Overall I am pleased and I've purchased these several times.

The product phot shows LED tape with connection points on every section of strip. The LED tape I received does not have that which makes it hard to get the lengths I need and still have a connection where I need it. And even worse, it's not consistent! Just pulling out a few feet of tape, I get one connection after 4 sections (200MM) then 6 sections (300MM) then immediately after that, 4 sections.So even if I could make it work in sections of a consistent length 100mm long, this tape would…

This kit came only with a 2 amp power supply. The provided 2835 LED lights require 0.4 amps per meter or 4 amps for the ten meters of lamps in the kit. So I expected the power supply to be capable of at least 5 amps output to allow some reserve. The provided power supply may eventually fail due to overheating and require replacement depending on your application.We are going to use part of these lamps on another circuit and use the remaining five meters for use with the provided power supply…

I saw a YouTube video where someone replaced the original strips with these lights and they had light stripes when reassembled. I placed my strips about 1" apart and got fairly even coverage. Ordered (2) 33' rolls and used about 1 and 1/2 for a 42".I tried putting a strip on one of the angled sides but it put a bright stripe on the edge because the LEDs were too close to the panel. I unsoldered that strip and opted to go with a less noticeable dim outside edge.Upside is a working TV for the…

I was doubtful at first how this would work. I found steady un-switched AC power from behind my dishwasher. Basically map out the light path in your head before starting. Also be sure your surfaces are clean and dry like it says in the instructions. Now that I'm done, my wife wants another set on the kitchen island and the pots & pans cabinets. Just be sure you have electrical power within 3 feet of the dimmer. If not then you'll have to use an additional wire to carefully extend out your power

If you want these to stay up you definitely can't rely on the adhesive on the back of the strand. In my experience other brands do much better in that aspect. You'll definitely have to use the screws and plastic clamps that come with the lights to ensure they don't come down. I love the dimmable feature and the lights provide a beautiful glow to the house. I'd probably try another brand before purchasing these again but they're definitely good enough to keep and not return.

Okay, here’s the problem; I put some storage racks in my smaller two car garage. Now the stuff on the storage racks blocks the light from the overhead. So I purchased the Onforu product to put LED’s on the bottom of the racks. The thinking was good. But. There is a always a caviot. After I installed an 8’ strip I found the the LED’s were too annoying and dot-ie.COOL DIFFUSERSSo in looking on Revain, I found found extruded aluminum with translucent defusers that work solved the problem. These…

I like warm white light as daylight leds tend to give me a headache or sore eyes. The product may not be UL certified or meet safety standards. these lights are to brown for me.

I created a custom light bar for my 3d printer. Light is not blinding but easy to manage and good spread and white not yellow. Will work great for under cabinets, drawers or any work area lighting. Easy to customize and install. I will also be installing some in draws of my workbench and will buy again.

4 out of 5 due to the reason it didn’t come with a remote to be fair it did not say it did in the description but it would have been nice over all very stratified and came out looking really cool