🔧 OTOHANS AUTOMOTIVE CNC Aluminum 2" Folding Gear Shifter Shift Lever for Honda XR50 CRF50 XR CRF 50cc 70cc 90cc 110cc 125cc Dirt Pit Bike in Green Review

It would be perfect if I didn't have to shift gears to move! But, as they say, this is not ideal! Not suitable for Yamaha TTR90! Probably not suitable for many off-road motorcycles!

Great looks and tone, made to a good standard. Unfortunately it doesn't hold, the screw is screwed in all the way and keeps falling off while driving. Maybe this is one of the, but decided to reinstall the original.

The quality is normal. There was a lot of burr left in the wedge hole from cutting the wedges so it took me a few minutes to dig it up with the picture before I could install it. One of the other reviewers said it's suitable for a Bashan storm, of course it's suitable for a shank but definitely not long enough unless you ride barefoot. Only about half an inch of the pin protrudes from the motor housing. It will work for now, but it's far from ideal on this bike unless you want to wedge your…

Seems to be well made apart from a lot of dirt on the splines during production. I had to clean everything up. I'm also not sure how long it will last since the head of the screw is upside down. So if the screw somehow loosens and falls out, consider it gone. I have a feeling it was bad design. I apply blue Loctite, I hope that doesn't happen. Don't throw away your original derailleur, though, throw it in that tool bag you take with you when you ride, just in case. It's also a bit longer than…

Contents: Using a vise and hammer, bend outwards slightly to avoid contact with the crankcase cover when upshifting. In addition, the screw hole is far enough away that the screw does not rest against the chamfer on the shaft, so the switch is only held in place by the friction of the clamp. I only discovered it when it almost fell off, and when I moved it halfway I started marking the thread. So I had to tighten it more than usual for the shifter. Still functional. Length: A good length for…