Optimized Equalizer Harley LED Load Blinker Turn Signal Lights Resistor Flasher Relay Fix Review

As advertised, this has cured the rapid blinking of my newly installed LED signals on my 07 Road Glide in both the front and rear lights. The two resistors also have enough wires to fit snugly on the side of the battery compartment in an area that won't cause damage from heat generated. It's plug and play.

This looks like something I bought years ago for my 2006 legacy and it was a well known brand but at a higher price. This doesn't work well as I had to bring back some LED turn signals because they didn't work properly (left and right flashed at the same time when either one was applied). You get what you pay for I guess.

This solved my problem with turn signals not flashing and only staying on when I switched to LED lights. Now my turn signals are flashing like they should. And yes, they do get warm/hot, but only if you leave the turn signals on for more than 3 minutes. My Harley has turn signals that turn off automatically, so no big deal.

I installed this OZ-USA EQ on my 2009 Electraglide with factory safety installed. The equalizer got very hot immediately after installation, causing the headlights to work erratically (i.e. the turn signals worked and the emergency lights turned on). I checked the wiring and found no problems. I replaced it with a Biketronics B801 Rev J and now everything works fine. I returned the OZ USA equalizer for a refund.

Helped fix my 05 Dyna Lowrider turn signal problem. I have now replaced the 1157 front and 1156 rear curves with compatible LEDs. Without them, the revs will flash quickly. I have dangling bits hanging next to the fuse cover so heat won't be an issue I don't think. They are of good length. I also have a rear brake warning light from the same company so the center brake light blinks, then blinks, then stays constant when I apply the brake. Both ways are cheaper than anything else I've seen.

Works great on my 2001 Harley Road King FLHRI. After installing the diodes, the turn signals stopped flashing. LED lamps do not draw enough current to activate the flasher relay. This equalizer is plugged directly into the existing wiring and works immediately. I've seen several reviews mentioning that it gets hot if left on for a long time. I can't say that I had such problems. Been riding the bike for a month now with no problems. I recommend this if you are switching from incandescent bulbs…

This item did not solve all of the problems I had when replacing incandescent bulbs with LEDs on my HD '08 Road King. The LED gave me 3 problems, fast blinking, light on when it's off and the ignition light stays on. This fixed two issues but created another issue. Fixed fast flashing and pilot light but turn signals are still on and now all four turn signals flash when braking. what I wanted. They were accommodating with my return and I eventually returned to the turn signal bulbs.