💡 SnapPower GuideLight 2: 4 Pack LED Night Light for Outlets - New Version with Automatic On/Off Sensor Review

The first place (in the bedroom hallway) we installed this LED panel felt like a flashlight shining into the bedroom all night. This was unbearable so we decided to move it to another corridor (next to the back door). Well there were 3 or 4 conductors on each side of the duplex jack and a black wire in the path. so it won't work. Yes,,,, I moved the black wire. Nevertheless"does not work". Today we decided to stay in the dining room. There was only one white wire and one black wire, so there…

After reading some of the reviews on here I was a bit skeptical. But I ordered two to try - and they work very well on my outlets. However, I did learn a few things about her. Power sensors are not centered on the disk; They're offset slightly toward the bottom of the plate, so I had to flip my sockets to get them to fit properly; process that made me feel good. However, once I figured it out, the guides worked as advertised. They turned off in proper lighting; a dark room or hallway stops…

It is fitted with spring contacts which need to be mated to the electrical contacts on the side of the socket. When installed correctly, however, the pins protrude well beyond the standard overhangs of the socket. I built my own house, including the wiring, so I'm very familiar with the electrical system in my house. After trying this product out on my standard 20 amp outlets, I took this to Home Depot to test at the various outlets that sell them. The contact protrusions on the cover are too…

Let's get straight to the pros and cons because that's all that matters. Bright. Illuminates the ground around him. Looks very cool.2. Slim. It's way better than having a night light. This also frees up both ports.3. Just like a cake. Simply remove the current cover screw in the new one. Done Cons: 1st prize. There's no reason there are so many. This is a unique product which is why they increased the price. As soon as there is competition, I hope that the price will go down. But now they are…

I bought a pack of 10. One out of 10 failed. SnapPower sent me a new one with a bad return label, problem solved. I really like the lights, but there are a few things to watch out for. They're pretty expensive for what they are. The ambient light sensor sits too deep in the lid, which causes problems, e.g. B. that the light stays on all the time during the day, even when there is a lot of light in the room. I think the sensor should be moved closer to the surface of the board and away from the…