💧 Revive and Rejuvenate Your Cooling Loop with PrimoChill System Reboot Review

I had a wheel that worked on acid green cryofuel for a while, then it was taken out of circulation and washed many times and then put into storage. When this wheel was returned to the loop, it was washed a few more times, after which the loop was again washed with water for several weeks. I kept getting touches of green and planned to use cryofuel. To make sure it didn't turn green, I took full advantage of this product according to the directions. It got a lot greener and I thought this must…

Like everyone else I bought this with low expectations. But it worked great when I used "Method #2" to clean up. They list it on their website but not on the bottle. It's ok, the bottle is small. Method 2 pretty much involved me throwing the whole bottle in a loop. For Method 1, mix it with a gallon of water, then fill the loop with the mixture. My results were good with Method 2. Worked for 48 hours, required a lot of block staining and sectioning. The tube is fine, without some decently toxic

There were no serious stains that needed to be removed and whether it was even necessary, but I used it. Replaced the water block and radiator but retained some of the existing components. I disassembled and cleaned the water block. Then I treated the new radiator with Primochill Rad Clean and rinsed it out well. I then put everything back together and spent over a week rebooting the system using the second method (using all of the concentrate in a loop). After draining and flushing the system…