Pros
- - Very easy installation on the mat. board, however, due to its large dimensions, I still recommend doing it outside the case - The declared TDP is almost not a lie - Pretty quiet, at maximum fan speed it turns out + - like case valves - Cool branded screwdriver included
Cons
- - The central valve is 135 mm, narrow and, in general, practically cannot be replaced by other fans, however, you can talk with the manufacturer and get a replacement for free or for money, but the main thing is that you can get - R7 5800X does not run stress tests in stock turbo boost. In general, the fault here is not the cooler, but the technical process of the CPU itself - a very small area from which heat is released. In games, it keeps temperatures of 62-69 degrees. - Do not lose the complete screwdriver, otherwise you will need a similar, very long one for installation - During installation, it is not difficult to peel off the paint from the ribs, but in general this will still not be visible
Pros
- I took it for the looks. Looks solid and solid. Quiet.
Cons
- Not all RAM will fit
Pros
- Rich set. The SCREWDRIVER included is super cool! Handles the 5900 fairly well.
Cons
- Hefty. It is most convenient to install outside the case on the motherboard, and then screw it into the case. The only really big minus of this whole model is that the turntables are not standard. If they break, then it will not be easy to find a replacement for them, just contact the manufacturer. You won't find them on the side.
Pros
- -quiet -Beautiful and strict -Easy to install -Excellent cooling -Good package
Cons
- - Native paste is thick, did not use it. - the guarantee is less than that of a competitor twice - the cooler that is inserted inside is thin, it will be difficult to find if something happens to it
Pros
- Good equipment, screwdriver, two sets for intel and amd
Cons
- A very ill-conceived installation system, in order to install this cooler, you need to literally disassemble the computer to its components, disconnect the video card, unscrew the motherboard from the system unit to install the second screw (yes, yes) it just lies in the kit, you install it yourself, because the cooler cannot be installed with the second screw installed.
Pros
- Silence Efficiency Build quality Screwdriver included
Cons
- No
Pros
- Quiet in operation even at full speed is not audible, not so heavy and huge personally as for me. The mother MSI MEG Z390 ice with this cooler feels tolerable, does not bend (maybe someone sags, I judge from my practice) cools 9900k in manual overclocking on all cores 4900 Hz at a voltage of 1.26v, I applied my old old theomopaste to the processor MX2 (the MX 4 may well be a little better, but mine is enough for me). At idle 35-40 degrees in load after a 60-minute Aida64 test, it warmed up to a maximum of 85-88 degrees, at room temperature 26 degrees, with a 4-hour render in Sony Vegas, the situation is similar to that in Aida. 58-60 degrees. As for me, in the combination of design, noise level, work efficiency, you can’t find a better air cooler, holding it in your hands you feel reliability and the effect of being sold a real fit. Yes, I forgot to say, I put it in my old Zalman Z9 plus u3 case with a declared cooler height of 160mm with a margin of 4-5mm approximately (the nuance was in the side window where acrylic is installed on the inside, the 5mm pin roughly touched the cooler when closing, I cut it off with wire cutters so as not got in the way and closed easily like a native with a small margin of height). My main fear before buying was that it might not fit into the case, but in practice the devil is not as terrible as he is painted. Everything is intuitive with the mounting system, but if you haven’t practiced PC assembly much, I recommend watching the official assembly video from be quiet, everything is simple and clear without water. I was also pleased with the compatibility with my operational Gskill tradiend z margin of 2-3 mm, but the same noktua d 15 has worse compatibility and in order to insert it you have to raise the valve and due to this the height of the cooler will increase, which is not good. Cooler top, quiet, powerful, reliable, strong, the clamp also does not wag normally.
Cons
- If you paint the shortcomings, then for me there are none as such. But if you are a fan of RGB, then it may not fit into your design. Well, the paint is still, when you get tired of the valve, the steel mount can scratch the radiator and tear off a bit of paint (imperceptibly in everyday life in general, by the way)
Pros
- Performance, design, noiselessness, compatibility with RAM (height above the slots). The Germans know how to do it.
Cons
- Didn't reveal.
Pros
- The most important advantage is the result. Cools - attention - i9 10940! This is the same 14-core, which is called a boiler! Silence. Now you can safely put the render at night and sleep, the noise will not interfere. Solid and rugged look. Dimensions. Yes, it's not a typo. I don’t know what size of the tower from competitors, but I got into the aerocool p7-c1 case on the Asrock Steel Legend motherboard and got up without any problems. Back to back, yes - about 1 cm to the glass, but I'm not picky =) I am shocked and delighted.
Cons
- They put a little thermal paste (a joke of course)
Pros
- - top cooler number 2, the first Noctua D15 (usually 1k more expensive), there is also Assassin 3 from the same level as DR4Pro, like Fantex - quite quiet - a beautiful black design, but without cooler lights, pure dark dark, without RGB, someone says that black paint on the contrary makes it worse for heat dissipation, as for me I like the Noctua silver version more, maybe it’s more practical by a couple of degrees, I’m not chasing appearance - an interesting working design (look carefully at the heatsink from all sides when you buy it, I haven't seen anything like this yet), convenient for installing memory sticks higher, you don't have to raise the fan higher, like in Noctua, Fantex and some more. not a very large supply, but it is there. Gskill will be at the limit, Ballistics fit like a glove, another finger will crawl through - excellent equipment, though a screwdriver with a short handle for children, apparently it made sense to shove it into the box, but Noctua usually has no handle, just an L-shaped bend, for example - in theory, there should be good thermal paste, there are practically no reviews on it, although someone wrote that it is a couple of degrees better than MX4, given the fact that MX4 has been scolded for the last year, it may not be worth taking another paste that is complete for 1.5 servings somewhere, but you can stretch it into 2 bumps))
Cons
- - the fattest minus is that it can not cope with overclocking 10850k, throttling. think before buying if you have a top. 250W honestly barely holds up to 91 degrees, but there is no higher. 260-270 and gone to 100 degrees. there is an option to lower the Vcore, this will save watts and temperature, but it won’t win much, 100-200 MHz max and then it will hang around 99 and most likely periodically throttling. not worth it. - medium cooler non-standard, 20mm. the same cannot be found. although the operating time for a rollback is huge, the fact itself is somewhat sad. theoretically, if you remove the vibration pads, he will climb up against both colds, but it’s better to work a little with 22mm if something happens or suddenly Be Quieter will come down to us and let us buy this non-standard - if you pull it back and forth there will be chipped paint, the appearance will already be with jambs, so be careful
Pros
- The low height of the cooler, the ability to use it with high memory bars, heat dissipation and silence during its operation, it is solidly made and looks solid. The sole is polished and even, excellent equipment and clear instructions, an excellent magnetic screwdriver is included. The lack of backlighting is a plus for me - it is useless in my opinion on the cooler.
Cons
- Included with it is just a frivolous amount of thermal paste. It is enough, but if you do not often deal with the replacement of thermal paste, this point must be taken into account.
