Pros
- Excellent cooling, complete silence at maximum speed, ease of installation, rich equipment, strict appearance.
Cons
- No.
Pros
- A healthy monster that occupies all the space above the processor. It cools well, AMD Ryzen 7 5800X dangles about 30 degrees in idle, under load (tested on Keyshot 10, all cores) barely crawls up to 70 on bus. Included is a high-quality screwdriver with a magnetic head (without which, unfortunately, the installation will not be so easy, so it's better not to lose it). The installation is simple, if you put a tower on the processor at least once. The kit comes with very good thermal paste and very quiet 140mm fans, which are hard to hear in idle.
Cons
- The price can bite, but with a competent search you can find it for ~ 6800 (don't take into account , which I can't stand). However, such cooling comes at a cost. In fact - an analogue of a closed water system such as h115 from Corsair and the like or D15 from Noctua. It may not pull hot stones from Intel in overclocking (10850k and higher), I haven’t tested it myself, but reviews on the Internet and heat dissipation tests speak for themselves.
Pros
- - Power dissipation of 250W. In my Fractal Design Torrent case with Amd Ryzen 7 5800x, the temperature in the AIDA stress test with AVX instructions does not rise above 75 degrees - There is an offset to the sides of the rear panel and a cutout for RAM, so conflicts should not arise. Unless with very high dies. My G. Skill Trident Z Neo got up without any problems - Equipment. The kit comes with a chic screwdriver with a magnetic tip, which has become the main one for the PC. And also an adapter to plug 2 coolers into one CPU socket
Cons
- There are no drawbacks if you take into account the dimensions of the cooler. It won't fit into every case.
Pros
- The first impression is formed by the packaging, it is on top here. Next comes the delivery kit, everything is laid out in bags and signed for what it's all good. Great screwdriver included. Instruction in 2022. The fans are a separate conversation here) they are quiet, efficient and very high quality. The fans are different in diameter for compatibility with RAM with radiators. Well, the most important thing for which it is needed is the cooling of the processor, which it copes with very easily and cools the i7 4790k (the percentage is scalped) at idle 22 degrees, under load in tests it does not rise above 70 degrees at 4.6 MHz
Cons
- The retail price in 2022, bought from the USA with all the costs came out at 5.5 thousand.
Pros
- Silence, appearance, does not interfere with memory ( HyperX HX433C16PB3K2/32 )
Cons
- Processor i9 9900k MP Asus Maximus XI Hero, be quiet! Silent Base 801 Window Black. In the Aida 64 test, throttling after 1.25 minutes with the FPU turned on. Without FPU 87C.
Pros
- - looks stylish. - Seems to be quiet. - cools i7 8700k in strestest 69-71 degrees, at 900 rpm. fit on itx mat. board asus z370-i, back-to-back, but without kinks, slightly tilted the bar of hyperx fury RAM. - Fits in a compact fractal nano s case, although the height of the cooler is higher than allowed. Even the lid closed without difficulty. I have a version without a window.
Cons
- - not a big difference in temperature with the dark rock version 4. There in the stress test it was 71-72 degrees at the same speed. Hence the conclusion, dark rock 4 is sufficient for the i7 8700k. - despite the temperature, the lid of the non-pro version is warm even in the stress test, but the pro version is hot. - it was quite difficult to install in my case. - it is difficult to remove the fan mounts.
Pros
- subjective design. the installation is not so complicated, sufficient efficiency for the i7-10700k (not overclocked yet) in games above 70 the temperature of the processor has not seen
Cons
- ordered through market, one of the fans is the one that makes rustling sounds above the RAM when rotating in the area of \u200b\u200bmotors
Pros
- Huge. Air. 250 is allegedly capable of scattering. Heavy, high quality. There are adapters and instructions for attaching to almost all modern sockets. There is also a SCREWDRIVER as a gift) Under it, the norms, without piling and bulgarking, the memory got up - G. Skill Trident Z - there were doubts.
Cons
- Mounting brackets. It was hard to put them on. I could only fix my hooks through the "ceiling" of the case - I have nothing there. If there was no access through the "top", I don't know if I could put it up. Need instructions for installing a second fan and life hacks!
Pros
- There are enough fasteners for screws and so on for both amd and intel took abroad for 2 thousand cheaper
Cons
- Power dissipation, the cooler can't handle 2700x at 4.25Hz, 1.35V with Grizzly Cryonaut thermal paste. In stress tests, the temperature exceeds 90 degrees for 5-10 minutes. We focused on silence, but it would be better if 1500 rpm is not enough for efficiency. The stock cooler hummed at 4000 rpm but only performed 10 degrees more
Pros
- The Ryzen 3900X does the trick. But no overclocking. 4.2 GHz with "auto" settings - maximum. It is better not to lose the screwdriver from the kit - then it will be impossible to remove the cooler.
Cons
- Very heavy setup. While I was installing the fan, I bent a few fins in the radiator. Not bending them is a very difficult task. The brackets have a very strong, even excessive, pressure of the fan to the radiator.
Pros
- It cools the processor well, I5-10600kf in idle 35 °C (thermal grease from the kit for the cooler), under 100% load the temperature is about 70 °C. Climbed into the case of Be Quiet Pure Base 500 Black. The fan on the RAM side is smaller than average, the Kingston HyperX Fury (HX430C15FB3K4/32) fit without problems (bar height 34.1 mm), but the fan covers almost all slots.
Cons
- At low speeds, the fan that is inserted into the middle of the cooler hums a little, almost inaudibly, but at night it attracts attention.
Pros
- - Very quiet - Powerful cooling even with minimal fan rotation - Looks epic and massive - Fits perfectly in my system unit
Cons
- - No rgb backlight XD - complete thermal paste raises suspicions - To install on an AM4 socket, you need to have a motherboard backplate for the processor (suddenly someone lost it or something else) - Large size (but in order to be just as good on all counts with a smaller size, the laws of physics must be violated)
Pros
- - effectively cools; - not loud (not silent, but not particularly audible); - compatible with almost all current platforms for the average user; - installation did not cause any difficulties
Cons
- - the price in 2022 is too high; - heavy, it is better not to use on the mat. boards with thin textolite; - blocks access to the RAM, although this is not a drawback for such a cooler, but a cost.
Pros
- My system finally shut up. These coolers a meter from the system unit make hardly more noise than there is in the background. Compared to the boxed cooler from Ryzen 2700x - heaven and earth (yes, for some reason I bought Ryzen with a boxed cooler, I don’t understand why). Even at maximum speed, these coolers are likely to be the quietest part of your system. Huge, hefty radiator weighing almost a kilogram. It is quite ready to believe in the declared cooling capacity. Looks cosmic, does not glow.
Cons
- Installation specifics require a long PH2 screwdriver. If you lose the one that comes with the kit, do not remove the radiator until you find a similar one. Blocks access to the RAM, which is logical, given its dimensions, but leads to interesting gestures when trying to remove a die / finish off a die. The paint can be removed with a careless movement of the hand.
Pros
- Appearance Ease of installation
Cons
- Expensive Heavy, it is desirable that the motherboard has reinforcement
Pros
- Quiet operation (audibly quieter than wraith prism). Copes with cooling of 16 core processor.
Cons
- It covers RAM slots (msi gaming plus x570), the heatsink itself covers 1 slot, the cooler occupies 2 more slots, there is access to the 4th.
Pros
- The price is 6000 with EXPRESS delivery, I received it in a couple of hours on Friday evening. High-quality cooling, 5600x is not hot, but now it is even 64 degrees in the ceiling in a stress test, the cooler curve is set from under the BIOS. The height of the radiator and valves, allowing it to be placed above the RAM, but by the height of the tower itself, it’s better to measure yourself whether it will fit to you. Screwdriver included, which is not bothered to put COOLER MASTER. Good kit. Quiet. 7 tubes.
Cons
- Installation: it's just a torture to try to install it in a ready-made atx configuration in the Mid tower, and an even bigger problem will be if I want to remove it or replace the coolers with blown ones, I have to unfasten the backplate, because you can't just remove the internal cooler, these fasteners will destroy you morally.
Pros
- Yes, I liked everything, a great cooler.
Cons
- This is not a flaw, but rather a note. For an inexperienced user, it can be difficult to install. Nevertheless, the replacement of fasteners and screwdriver assembly will be a problem for many.
Pros
- Very quiet! Great look Everything you need is included, even a screwdriver.
Cons
- Very bad thermal paste included Nowhere is it written what kind of thermal paste it is and what its characteristics are
