Rannb Oil Filter Cap Wrench 65mm Inner Diameter High-Grade Aluminum Alloy with 14 Flutes Review

Part number listed and marked as 73mm. It is 74.5mm long and has a 0.5mm taper. It is much more than advertised and needed (too loose). Ideal for AC Delco filters from 72.7mm to 73mm (back to back). Why is everything the wrong size? very frustrating. They are well made, just not custom made.

I used this to remove the oil filter from my 2012 Sonata. None of the other filter slots will fit or catch or snag on the filter. I'm glad I found this and it will come in handy for my next oil change. I would highly recommend this jack and it looks and feels like a quality instrument!

I am having trouble installing the oil cap on a blue Subaru oil filter that measures 65mm. Standard 65-67mm slips easily and prevents the filter from being tightened to the correct tightness. This filter wrench is perfect for removing and installing that particular oil filter.

This makes it easier to remove the filter rather than using another device that wraps around and tightens. I had to use a makeshift key extension for my Kona as mine is short. Be careful when you put it on the filter and make sure everything is even. I accidentally placed the device at an angle to the filter and it was difficult to remove.

Does not work well with UFI Oil Filter 2316202 (Ferrari). Product Description: 95mm/3.74in, 19 grooves, but the size is 94mm. The material is soft, so if you get caught on the filter it will warp when you remove it. I'm straightening mine, but it's not perfect. I wonder how long it will take to adjust the roundness of the profile each time? In any case, check your items and choose the right size.

Very well made cast aluminum oil filter wrench. Much better than the stamped steel versions as the 1/2" square ratchet hole is just over 1/2" deep compared to the thickness of the steel on the stamped piece of steel. In no case will it be twisted or removed. The 75mm x 15 wrench fits snugly and is tight on the filter for my 2019 Hyundai Santa Fe 2.4L engine. I used a Fram XG9688 filter (an upgraded version of the standard XT9688 filter). 5 stars for this oil filter wrench and low price!

This piece of junk is not 65mm groove to groove. I spent some time using a couple of files and my Dremel tool to bring it down to around 64.5mm which is the spec for an oil filter wrench for a Mazda 14. I removed a lot of material and it took time and patience. It's better than buying an $80 Kawasaki Mule oil filter wrench. The 901 has a sloppy cast with ridges and bumps. Even the flat spots had crowns. It's junk, but it's cheap junk compared to OEM oil filter wrenches. Now it fits my Mazda…

For Deere 2020 S240 Kawasaki Engine Mower. Kawasaki Filter: 49065-0721 (replaces 49065-7007) This is a 74mm 15 groove wrench that is a perfect fit for the 2020 Kawasaki engine filter on the John Deere S240 self-propelled mower. I use a 1/2" extension and have had no problems with that. The first time I removed the factory installed filter I found that it was severely overloaded. This filter would not move when I was just using my hands. With With this tool and a 1/2" socket wrench, the filter…

The product is very light and unreliable looking. Its dimensions correspond to those indicated. 64mm between the flat sides of the groove, 65mm between the two corners of the groove. Outer diameter 71mm. Wall thickness from 3 mm to 3.5 mm. The wall is very thin. That should be enough for home use. The fit between this oil cap and the original Honda 15400-PLM-A02 oil filter is very tight. I had to hammer the oil filter cover in to get it fully engaged. I was then able to detach the factory oil…