🔧 Enhance Suspension Efficiency with ReadyLift 66-2024 4" Block Kit Review

Bolts have 4" behind the nut that need to be cut off. The blocks are hollow inside. But otherwise they seem to work as expected.

Worked great on 11 f250 srw. The mouldboard preparation at the front and rear always sagged a bit, so it sits well and pulls the trailer much better, not more squat. original shock absorbers and I didn't have to buy longer ones. However, after installing it, I shortened the U-bolts that came with the kit, they were quite long.

For those looking to purchase a rear unit similar to the OEM F350 4WD unit this is a good option. Looked very similar in quality to the OEM F350 block. The supplied U-bolts and nuts proved to be of high quality. If you're looking for a true 4 inch measurement down the center of the block, this isn't it. The dimensions are almost the same as the OEM F350 -3 5/8 inches at the center of the block.

I have a problem with a set that contains two identical lifting blocks. In this case, DO NOT install blocks. The blocks are tapered and should be squarely opposite each other. If the arrow is pointing backwards, the wrench is on the wrong side. I called for a ready lift and they spent the night doing another set for me. Amazing customer service from a finished elevator! It would take Revane a week to send me another one.

Basically just bought U-bolts because I have to go the other way for the blocks. Too much angle built into the block to supposedly correct the angle of the gear and this created vibration under hard acceleration of 65-80. At 80 speed I still feel a very slight vibration, but that can only be because I know they caused vibration when accelerating. However, they won't stay in the truck and find something else. Yes, that is the part number for the correct truck. I have a 2014 Crew Cab Short Box…

Do not order if you have a long double cabin bed. The blocks are angled too far leaving your gear too high. You will have vibrations on the driveshaft. I tried adjusting the support bearing to different amounts, but the gearbox turned out to be too high for this wheelbase. ReadyLift needs to advertise this product for a specific wheelbase and offer a different block for a longer wheelbase. How did I fix this issue? Locate a SRW F350 on the dealer's lot and use the VIN to order the blocks that…