Exhaust Flex Pipe RP Remarkable Power, RK7540-2.25" X 6" - Heavy Duty Stainless Steel, 10" OL Review

Did a great job fixing my leak and got me through my MOT. If your flexible pipe has a leak, it cannot be fully patched. It must be welded to an existing pipe.

So if you know what you can do and weld then I highly recommend this product. FYI, for DIYers, stainless steel is too strong to clamp, so I wouldn't recommend it to anyone looking to try. Also, be sure to carefully measure the diameter, bend length, and overall length.

Other reviews say it's too tight inside but the one I got is perfect. The ends are sized to fit a 2nd .25" exhaust pipe. The inner cone will fit your 2.25" exhaust pipe I.D. without any restriction. Because of the bad reviews, I almost gave up.

Excellent quality, will definitely be ordering more. This was the closest flex pipe I could find online that fits the Camry 07. Yes, it required modifications, but it's an exhaust, you often have to flare, weld, cut or splice. I opened up one end a little to fit the pipe and shortened the other end by about an inch. out. Fits great.

Install it on the ends of the previous flex pipe welded to the original exhaust pipe. I tried band clamps but they are not tight enough, I ended up welding them on for a better seal. The quality of installation is good, only time and the road salt this winter will tell for sure. You've saved a ton of money by not going to a muffler shop if you have the DIY skills.

For the most part this is a good flex pipe. However, in most cases it has to be welded on to avoid leaks, since it is usually installed BEFORE the catalytic converter. The braided/flexible part of the pipe seems to be of pretty good quality but the tailpipes are quite thin and if you have to widen them even a little to fit the pipe they only get thinner. While welding this to an existing pipe I had to turn the heat/current setting completely off to prevent a hole in the pipe.

I bought this one thinking the inside diameter would be at least 2-1/8" 2". The mesh runs inside in. For this reason it is 3 stars. Looks good. Have to buy a larger size and downsize to make sure I get the 2-1/8" inner diameter I need. Packed ok and looks like stainless mesh but not sure if the outer tubes are stainless. They look like aluminized or mild steel.I would buy again knowing what I know now.Hope this helps someone choose the right part.