Richeer 5X4.5 Wheel Spacers For YJ TJ XJ MJ KJ KK ZJ Wrangler Explorer Mustang Edge Ranger, 4PCS 1 Inch 5X114.3Mm 5 Lug Forged Wheel Spacer With 1/2-20 Studs 82.5 Mm Center Bore Review

200 Jeep Cherokee. I put a wider tire, 31x10.5 tire on the stock 15x7 rim. I did the same on a previous 98 Jeep Cherokee with no issues. Apparently the rear tires were touching the sway bar so I thought I would put spacers to accommodate the wider tire. I put 2" spacers on all four. After about 2 weeks I removed the front spacers because the tires were rubbing up against the stock fender flare. I couldn't turn as sharp due to the rubbing. Actually pulled the flare off the bottom of the body…

ebay said it would fit but the size of the bolts was different for my 2020 Ford explorer xlt ecoboost. I bought new nuts to attach spacer. Make sure you have the right nuts for the fitting

In the description it said it was hub centric for keep Cherokees. It is not hub centric unfortunately. Other then that they fit and look great

These 4 Richeer wheel spacers came packaged nicely with all the components included, (4 spacers and 20 lug nuts). They installed easily and appeared to be the correct fit, however, when driving on the freeway my TJ developed square wheels, bouncing a lot. I did some research and some measuring and found the spacers were not hub centric, they were only stud centric. the inner diameter on these spacers are, as described, 82.5 mm, whereas the diameter on the hubs on my Dana 35 axle are only 71.5…

They feel good, i used loctite supplied. I torqued to spec. Im hoping i dont die tomorrow on my way to work. I took it for a ride, and its super smooth at 55mph.

Lasted 35 miles before it took the threading off the tires and ripped my wheel off in the middle of town. Luckily nobody was hurt but there is damage to my truck.

This product was well packaged, simple to use, my 16 year old daughter put them on herself (with supervision). Makes her jeep look beefier and much improved turn radius.

Doesn’t fit my truck. Wrong item description. U trying to kill me bro? Check your freakin compatibility. It says it does fit my truck but it doesnt.

If you are buying this product beware, the holes fits perfectly but the problem is that you have to find out the way to replace the bolts that coming with this item and get some wheel nuts that fits into the hole of the wheel spacer. why? Cuz the original bolts from the hub they are for M14 x 1.5 wheel nuts with a 21mm hexagonal head, in my case I put them work because I am a mechanic working in a shop so I found some wheel nuts that I'd modify to fit them into the holes, but regular person…

Perfect spacers for the stance I wanted. Yorque to 100 ft lbs and wheels too. Check after a couple weeks. Mine held tight.

firts of all the spacers are not HUB centric for my 98 wrangler. They come close to the but but there still is a bit of space in between and so fan seen i put them i have not have eny problems with it. So far i am happy with the product and loocking forward to see how long they last me.

These are forged not cast, and according to a tremendous amount of research, are stronger and will withstand much more wear and tear. And since they are on my wheels. They went on as easy as the instructions said and I couldn't be more pleased with the look of my Jeep as well. I recommend this brand to anyone looking for this type of product.

WARNING These did not fit my 2012 Jeep Liberty KK as it says the would. The center bore on my Liberty is 71.5mm, these are way to big. Will be returning.

It's a spacer. I have ran them in the past without issue, so I am running them again. Torqued them all to 100ftlb, as that's what my rigs required. No red locker for me, I take stuff off for repairs and that gets in the way. Never had one come off yet and wheel them hard. Will update if I have an issue. So far at 75mph I have no vibs.

Did the job making my BX2380 more stable adding this extra width to rear tires is well worth the price of the product. Could potentially lead to decreased driver control of the vehicle!

I put my spacers on. yes they fit great yes they look like they will work great. these are not made for street use these are not hub centric. Do not plan on driving over 45mph without severe shaking

I installed these spacers on my 1999 Jeep Cherokee XJ. The fronts went on with the stock studs. I had to source and install longer rear studs.The spacers fit well and appear to be well made. I was off road wheeling this past weekend and have no complaints.

It says this is for Four but I was only mailed Two, and getting no response from the company really turns me off. I’m sure they’re great but I can’t say so with only two spacers.

Easy to install. My lug bolts where longer then the spacers but fixed that quickly. I did not put thread lock on them because I did not know if I would like them . They worked and I liked it. but forgot to go back and put the thread lock on. almost lost a tire lol. Use the thread lock .

love them have 2 sets on tj jeeps but very important use the red loktite and torque to specs overtight is really bad it will stretch bolts and make them come loose