🎮 Rinbers Pack of 2 JDS-011 Replacement Charging Port Micro USB Adaptor Charger Socket Circuit Board for Sony PS4 2nd Gen DualShock 4 Controller - 12 Pin Flex Cable Included Review

Parts didn't work I replaced the charging board in my PS4 controller, the controller board was the same number. But nothing works, neither light nor shop. The old board was charged but didn't sink. I tested 2 LEDs on my old board that had charged LED readings. On the new board, the LEDs were unreadable, so the LEDs on the new boards were difficult to read.

If you know this is the part you need for your DS4 then it is 100% working. Zero issues on my part, it's pretty easy to install. The positioning is awkward at first, but keep fiddling with it until it's exactly the same as the old one. Also, make sure you keep the little black tape from the old DS4 charging port. Otherwise dirt will get into the controller and light will leak out of the LED.

Be sure to open the controller and read the part number on the circuit board before ordering. There are different boards that can be used with any controller model. I ordered 3 before finding the right one but once I found the right one I installed it from a YouTube video and it works great.

Parts did not work same part number. But nothing works, neither light nor shop. The old board was charged but didn't sink. I tested 2 LEDs on my old board that had charged LED readings. On the new board, the LEDs were unreadable, so the LEDs on the new boards were difficult to read.

So I I opened up my PS4 controller and changed the skins to make them personal and unique. I recently opened it up again to change the buttons to gold metal buttons. However, I confused the charging board/strip with the LED display. Stressed that I need to buy a new controller, I researched and found this product to solve my problems. It works great, swapped out the charging board and ribbon (the ribbon can't be easily swapped out as it doesn't match the OEM charging pins), put it back together

The controller was not charged. The original Micro USB board and cable have been removed. Once removed I was able to read the circuit board to make sure I ordered the correct one. Removing broken parts was very easy. Installation can be difficult depending on your skills. It was pretty easy for me, but I can see it was difficult for some. When reassembling, the trigger popped out (they just rest against the frame). Not a big deal, but a tiny "maintenance spring" popped out as well. These little