- Draws the map well. Works out the route well, there are practically no untreated places left. You can set an individual cleaning mode for each room You can set a cleaning schedule indicating the rooms to be cleaned and the mode. Can be controlled remotely via the Internet through a mobile application (including in remote control mode).
- Through a mobile application, it is controlled only via the Internet via WiFi. It seems that the control is performed through a server located in China, since both the vacuum cleaner itself and the mobile application connect to the same IP address belonging to the subnet of the Chinese company Kingsoft Corp. Those. if for some reason there is no Internet or WiFi, or for some reason there is no access to the Chinese server, you will not be able to control the vacuum cleaner through the application. When cleaning, long hair is wound on both the side brush and the main one. You can only delete it manually. The side brush can be cut with scissors. If there is a lot of winding, you will first have to remove the side brush by unscrewing the screw. To remove hair from the central brush, you have to pull it out (it snaps) and remove the side bearings. Curtains are non-contactly perceived as an obstacle with the help of a laser lidar. Those. when cleaning, it is desirable to raise them above the level of the lidar. He does not see large mirrors up to the floor, on the map he draws a reflection of the room in the mirror and constantly tries to break through the looking glass. It is necessary to manually block such mirrors on the map with an artificial barrier. If the apartment is very dry (for example, in winter, when the heating is turned on), fine dust can become electrified and stick to surfaces so strongly that neither the side brush nor the main brush can remove it. It also sticks to the surface of the vacuum cleaner, and after cleaning you have to manually vacuum the vacuum cleaner itself, especially after carpets. During wet cleaning, streaks often remain, since the napkin itself accumulates dirt during wet cleaning and from some point simply begins to smear it. If the carpet is thin, when you try to drive on it, the vacuum cleaner will crumple and move it. It is necessary to clean all thin and small carpets before cleaning.