Through MiHom set up a warm floor on the balcony. But it is important, it works only through the hub. Underfloor heating powered by a smart socket. The hub, according to information from the sensor, turns on or off the warm floor. Everything works perfectly.

For the sensor to work, a ZigBee gateway is required. For mihom (xiaomi gateway 3), the cheapest one I found on Ali costs 1800r without bp. Pressure readings in pascals. To convert to mmHg. multiply the readings by 7.5.

I'm not sure about the accuracy of temperature measurement, I have 4 different sensors and they all show differently -), but you can understand the trend.

Global version, there was no starting film under the battery and a scotch ring was glued immediately + 1 spare. (in the RU version there was a film, 2022 text on the back cover and only one ring of adhesive tape in the kit.) There are no differences in functionality, they connected to the M1S hub without any problems, only the default name is in Latin and the software version is 005 instead of 000 for RU. One hub in the kitchen catches readings from 2 rooms and a balcony flawlessly.

Pros below: Easy to connect, no power required (built-in battery) Works with Alice's column 2 version without dancing with tambourines. Cons: I doubt the correctness of the temperature readings, but these are my personal feelings that still need to be checked, so I did not reduce the rating

Has some pros The fact that in addition to temperature and humidity, the sensors also give out atmospheric pressure. At the same time, graphs are being built ! With its cons. It is a pity that, according to the instructions, the sensor cannot be hung on the street. But I still hung up. Outside temperature is very important!

Bought for climate control. When trying to connect to the gateway (MI Control hub), I got an error <devices are not compatible> with such a problem, you need to quickly press the hub button 3 times, after which it will turn pink (it will go into the device connection mode), and hold down the button on the sensor until until he blinks 3 times. Voila, the device is connected

If anyone needs it, I can tell you where I got the gateway, humidifier, reverse osmosis (with all discounts for 6000r) Pros: Easily connected to the Aqara m2 gateway (I took a new one for ebay for 1800r), easily set up scenarios with xiaomi ultrasonic humidifier from Ali for 3200. All Certify! Issue price 6000r. Its cons: There is no automation for the sensor in station and you have to buy a gateway and devices from the same company. But for me it's more + than -, because when Wi-Fi falls off,

I took it to each room, connected it to the Station, taught the air conditioner to turn on and off according to their testimony. Satisfied!

I bought a set of sockets, a hub and temperature sensors for a summer residence. Very convenient and simple. Set up startup scripts depending on the temperature. When not at the dacha, the temperature keeps from 10 to 15 degrees, and at night all the batteries turn on, since electricity is cheap at night. The day before arrival, I turn on the scenario that I am in the country, and the temperature rises to a comfortable 22-24. Everything is remote, extremely logical and convenient.

The round sensor (of the old type) is no longer detected by Alice. Alice sees the new sensor, but the scenarios do not work with it, which is very sad. The climate has been postponed again for an indefinite period. Pros: Works great in aqara home (Aqara gateway M2 gateway) sees the temperature in the smart home. That is, all data after pairing is available, except for pressure. Has some cons He categorically does not want to work in conjunction with scripts (scripts) with an air conditioner or

I connected directly to Alice version 2 without any problems. But the scripts are stupid, sometimes it doesn’t work at all, sometimes with a delay, but apparently it’s in Alice herself

Different pros: works with gatawey 2. Alice also immediately saw and connected to the smart home. Cons: in the native mi home application, the pressure is reflected in kilopascals

In general, the sensors are good with the page of the 2nd generation, I contacted immediately without a hub and without problems. In general, the impression is super, but 1 sensor shows the wrong pressure

You can connect with station via zigbee without additional efforts, but Station-2 can do this. The mini station could not connect without the aqara hub. Be careful not to have to buy a hub as well. I wanted to check if the battery was inserted into the battery, I tried to open the back cover, everything was so crumpled. Now I don't know how I can open it when the battery runs out. Very soft plastic on the back.

Initially, I got this Aqara temperature and humidity sensor without a Hub, and one of the reviewers on the Internet was to blame. He said that up to 2 devices a hub is not needed. So, a hub is needed! After that, I already bought the M1S Hub, everything quickly connected. You can work with both Aqara and Xiaomi applications. Pros below: Aqara temperature and humidity sensor does its job perfectly. I have 2 of them on the balcony and in the bedroom. With its cons. While they are not. My first…

Its pros: Works. And now one of these sensors is on my street and so far (up to mins 8) has not died. Let's see what will happen next. Some cons: Sometimes the farthest sensor falls off - it's 9 meters and two timber walls.

It was taken to monitor the temperature in the country while we are away, and, in general, control humidity. It copes with the tasks, it is stated that the zigbee protocol does not interfere with the communication of other devices and that the batteries will last for a very long time - well, let's check. There is no screen, it is ated quite often, I did not track it, but definitely not less than once every half an hour. You can add various smart functions to it in the application, for example…

One works to automate the air conditioner in the summer in a pair of Aqara M2, and underfloor heating in the winter. The automation for the air conditioner is set according to the t° in the room. as well as on the street. The second one in the bathroom, through the Aqara T1 relay, starts the fan at high humidity. The third monitors constantly the temperature and humidity in the cellar.