🔥 SEEKONE 1800W Heat Gun Kit: Digital LCD Display, Adjustable Temperature, Four Nozzles - Ideal for Paint Removal, Home Improvement & Restoration Review

From the day of arrival it was launched almost every day. I own a parts/vinyl wrap shop. So this thing always works. As for the heat gun, the digital controls it offers is great, the on/off button feels solid, the safety protection works well. short without using an extension cord. When wrapping a car with vinyl, the cable simply shorts it out. I'll open it up and install a new cable into the device. I need a good 10-15 foot cable. even 8' will work. But the hard (read cheap) 4ft cable is a…

This is a 1800W SEEKONE heat gun. I wrote this because the heater control is failing. It's very simple and very straight forward. You set the heat with the temperature thermometer controls. Use the plus to increase the heat, WAIT until the heat output is stable, much the same as in a jet plane cockpit to control a turbine engine. You have to wait until the heat is stable. To lower the temperature, simply press the minus button on the left panel of the thermometer. WAIT until the reading reads…

Ordered for use on Wire Insulation and Roofing Vinyl. Covid is conspicuous. A new heat gun is in the box waiting for a good month or so. go and use it And I see the numbers flying 1500 degrees even with the bottom floor broken. The whole back turns! 360 degrees and makes the screen flicker like crazy. And then nothing can be adjusted in the settings. The numbers say what they say, but the heat is either cold or very hot. Nothing in between. So yes, in terms of fire safety. It's in the GARBAGE…

My main use of this heat gun is to restore the look of plastic and rubber trim on cars. It's surprisingly easy and will give your faded black or gray a new look in just minutes. (See photos) The discolored LCD screen on the back of the unit and a few scuffs bothered me a bit when I unpacked the box. This is the second heat gun I've bought from this manufacturer and neither of them distributes the heat exactly where it's supposed to. With or without a nozzle, the hot air on both devices tends to

Media could not be loaded. The main problem with this gun is that the digital temperature control is not properly calibrated. Until this is fixed the review will be below. I was working with my cell phone and the gun was heated to 100C. After about 7 minutes, I accidentally touched the hot part of the phone with bare skin and wanted to stab, but was surprised when the phone was warm. To check, I took my grill thermometer and checked the actual heat output, and in fact the actual heat output was