🔧 64.7mm Cup Style Oil Filter Wrench for EMGO Spin-On Filters Review

I like what goes with the oil filter. And that's it. It takes about 2 seconds to loosen and remove the filter and 20 minutes to remove from the filter.

Should fit a 2021 Indian Chieftain oil filter. I managed to remove the oil filter. But then I had to tap the oil filter out of the oil filter puller.

I liked that it fits well, doesn't slip and doesn't spoil the oil filter. I also marked it with a paint dot as a reference mark to measure 3/4 turn after hand tightening when reinstalling the oil filter.

Super handy for removing the oil filter from my 2019 Indian Springfield Darkhorse. Makes changing the oil much easier. The only downside for me is that after removing the oil filter it gets stuck in the filter wrench and has to be tapped out with a tool to get it stuck. Additionally, there is no need to scratch/clean the oil filter with another tool.

Cup-shaped key holder fits both standard and aftermarket filters for the FJR1300. It was important to hand tighten the new filter on my bike the last 1-8 turns to ensure a secure seal. No problems have been noticed so far, our workmanship is good, as is ush. It's essentially a 65mm head with 14 sides or gripping surfaces [grooves]. This shouldn't work with a filter that doesn't have them, for example a brand with a high grit coating on the filter housing comes to mind.