Header banner
Revain logoHome Page
🎛️ rgb led splitter hub 5v with pmma case and magnetic standoff - compatible with asus/msi 5v 3pin led controller logo

🎛️ RGB LED Splitter Hub 5V with PMMA Case and Magnetic Standoff - Compatible with ASUS/MSI 5V 3Pin LED Controller Review

10

·

Average

Revainrating 3 out of 5  
Rating 
3.2
🔌 Computer Cable Adapters, 🖥 Computer Accessories & Peripherals

View on AmazonView on ЯM

Media

(2)
img 1 attached to 🎛️ RGB LED Splitter Hub 5V with PMMA Case and Magnetic Standoff - Compatible with ASUS/MSI 5V 3Pin LED Controller
img 2 attached to 🎛️ RGB LED Splitter Hub 5V with PMMA Case and Magnetic Standoff - Compatible with ASUS/MSI 5V 3Pin LED Controller

Description of 🎛️ RGB LED Splitter Hub 5V with PMMA Case and Magnetic Standoff - Compatible with ASUS/MSI 5V 3Pin LED Controller

1.This 3 pin RGB hub can extend any 5V addressable RGB products simultaneously, while only taking up one RGB header on your motherboard. 2. This hub is only compatible with 3pin 5V addressable RGB headers or controllers. not connect to 12V RGB components, making sure the arrows on connectors and headers line up. 3. Product Dimension: 88.6 x 45.6 x 18.8mm. 4. RGB cable length: 100cm. 5. Magnetic standoff design for easily fixing the hub in the chassis

Reviews

Global ratings 10
  • 5
    5
  • 4
    0
  • 3
    1
  • 2
    0
  • 1
    4

Type of review

2 stars for consistently ordering single row brake pins and waiting for boat pickups from all over the world. 1 bonus star for being powered via SATA and not forcing users to run a molex modular cable and avoid breathing near RGB cables that slip off as soon as you close the back panel. The options are to return it, or tape the RGB signal cables to the connectors, or wait a month to get new connectors from a far-off country. Solve each header. Solder new connectors. Congratulations, you now…

Pros
  • Easy to read control panel
Cons
  • Something is wrong

Revainrating 3 out of 5

Fiction! in computer cable adapters

Perfect for lots of RGB! I have 3x Delta Max RGB SSD plus a few other Argbs and couldn't run everything at the same time with a Cooler Master Splitter (no power). Now I can run everything and there's room for more! I also love that it's magnetic! I've seen complaints that the connections aren't tight enough, but that's not my fault. These are the connectors themselves from your devices. My Delta Max SSD 5V connectors are very tight and my XPG RGB extensions are very loose. But even super…

Pros
  • Quality construction
Cons
  • Appearance

Revainrating 1 out of 5

Works perfect! good for computer accessories and peripherals

I will join the not listening crowd of the group that hates this product. Works as it should and had absolutely no problems with it. You can hook up so many LEDs to the motherboard just before it needs power to work properly and then you need that. The power connector is perfect, as are the 5v 3 pin connectors. The product image is not included as it is not visible on the back and does what it is supposed to do. Just a picture of what he can do. Bring more light into your computer

Pros
  • Great for me
Cons
  • I vaguely remember

Revainrating 5 out of 5

Doesn't work for me.

I bought this to replace my Antec controller when I upgrade my gaming rig. Unfortunately this didn't work for me as despite plugging a hub into my Aorus Ultra mobile phone's 5V ARGB port via the DG1 connector and plugging in a dedicated SATA power cable, some of my LEDs stayed on after powering off. Strangerly, some of the fans either kept spinning or ticked as if they were trying to spin but weren't getting enough power. After a few tries, I went back to my Antec device. I would return it if…

Pros
  • There's something to it
Cons
  • Useless features

Revainrating 1 out of 5

Killed my CPU and CPU block LEDs. Avoid at all costs.

The computer has never attempted to start with this device connected. Even with only 5V Arg and the mains plug connected. After trying to use this splitter, my CPU was dead. The motherboard now has "CPU" lit in the corner. Tried a new motherboard, same thing. The CPU was known to run with this fine tuning before this splitter was used. After getting a brand new motherboard and processor, my cooler for my processor didn't catch fire with the new motherboard. Disassembled and found a burned out…

Pros
  • Quick replacement
Cons
  • Almost never

Revainrating 5 out of 5

Works perfectly. Tons of ARGB

It does what it promises. The top and bottom plastics have been film coated so they arrive in perfect condition. I haven't had any problems with loose plugs. The connectors on the board are male pins, so I expect problems with the socket before blaming the pins. I used a different cable to connect it to the motherboard, but the one that comes with it is nice and long. Most likely the SATA cable will run out sooner than the ARGB cable. There are no instructions, but they are not needed. I simply

Pros
  • Availability
Cons
  • Some shortcomings

2 stars for ordering single row cotter pins right angle on the board and waiting for them to pick up the boat from all over the world. don't breathe next to any RGB wires that slide off as soon as you close the back panel. Options - Bring back the RGB signal cables or glue them to the connectors, or wait a month to get new connectors from a far country. Solve each header. Solder new connectors. Congratulations, you now have a working product!

Pros
  • 1. This 3-pin RGB hub can expand all 5V addressable RGB products simultaneously while occupying only one RGB header on the motherboard.
Cons
  • Upgradeable

The hub works as advertised, it actually worked and allowed multiple ARGB devices to be powered simultaneously. However, this allowed power to be applied through the motherboard during system shutdown and bootup. The first power supply died after about 45 days of use. The second only lasted about 30 days. After I removed the ARGB hub from my system, the third power supply worked without problems for almost 4 months. I believe all of this can be fixed by using some good quality diodes to prevent

Pros
  • 3. Product size: 88.6 x 45.6 x 18.8mm
Cons
  • I vaguely remember

Revainrating 1 out of 5

OMG ARGB! Electronics

I was amazed at how such a device would work as little documentation is provided up front. I hope my brief review helps. Think the same way as an unmanaged network switch, in the sense that all ports can receive data from the parent controller, but no more than 1 parent controller can exist at a time. Other commenters say that you should run a cable from your ARGB source (like the mobo ARGB header) to the DG_1 header in particular - I agree with this approach. Regardless, the incoming signal is

Pros
  • 4. RGB cable length: 100cm
Cons
  • Off fashion

Revainrating 5 out of 5

It turned out perfect!

I didn't know what to expect after reading the reviews but decided to buy anyway because of Revain's excellent return policy. Happy to say it's great! I have no problem with loose connections and the connections are actually very tight and strong. I thought I needed tape or something to keep the connections from coming loose, but that's not the case at all. My Argb plugs are pretty tight and definitely won't slip off on their own. The magnets on it are strong and give me good placement options…

Pros
  • 5. Magnetic stop design to easily snap the hub into the shell
Cons
  • Some cons