Enhanced Star Products STATU24APB Tri-Exhaust Back Pressure Kit Review

Just received. I was surprised by the quality. Haven't had a chance to use it yet, but I'm sure it will work fine. I appreciate the protective cap on the sensor.

TOOL was damaged. I RECOMMEND THIS KIT TO ANY PROFESSIONAL AUTOMOTIVE TECHNICIAN. I would advise the manufacturer to provide a phone number and parts list in case we need to purchase replacement plugs or necessary parts.4-27-2013Gary A.

Only used once but seemed to work well, only showing a few pounds of BP and a few more on rev up. If you drill a hole like I did, since access to my O2 sensor is a no-lift PITA, be careful not to hit the exhaust pipe overlap point where the connection is, which is a little hard to see is as it is inside tube. . My hole was right in the middle of this internal overlap (which of course I couldn't see when I drilled it) so the insert that came with it didn't quite work and I had to cut the hole to

I was expecting a better composite sensor with this kit as it is from Lang who also makes this tool cart kit. The cheap gauge wasn't zeroed and didn't have the easy way to center the pointer like most gauges do. I decided to make this adjustment by first removing the attached hose. Then I removed the clear plastic frame by tapping the edge with a plastic pry bar. I then removed the two Phillips screws from the back of the sensor and removed the innards. The adjustment was then made using small…

But I prefer the tips in this kit. The sensor started showing vacuum. If you need accurate readings, get another sensor. The seller gave me another pressure gauge, but that was also defective. The kit includes rubber plugs that fit into several different sized holes (where there may be a check valve for the AIR system). O2 sensor plate for double nut type. or screws and threads in the plug of the O2 sensor. He also has some nuts and bolts with brass washers. Don't drill a huge hole for…