🔗 High-quality StarTech.com 50cm Internal Mini SAS Cable - SFF8087 to SFF8482, Red: Find Reliable Connectivity for Your Internal SAS Devices Review

Dell PSU does not come with additional Molex, only 6 SATA power connectors and other PCI-E devices. Use this adapter to power multiple 4 x 1TB SAS drives on an ESXi machine.

So if you want to connect an LSI controller (SAS9211-8i in my case) to an ENTERPRISE SAS NON-SATA drive, this is what you need . I was looking for a used OEM cable to no avail, so this cable was my only option. The build quality is VERY good as the cables "feel" thick and all crimp points feel solid. I tried using a regular SATA power cable from my modular power supply but the drive would not boot. I saw that another user had to use a Molex to SATA power adapter to fix this issue, so I had the…

These cables work fine for a while and then start to degrade resulting in weird hard drive failures in my NAS/Raid. I went through about 14 of these and a good quarter were bad. or just keep getting worse.

It had no power connector to work with the Dell Poweredge server. I added a Dell Perc RAID controller. The server was only connected by cable. This cable does not connect to the power supply of the Poweredge

I keep getting failures on cable #3, I've tried 3 different drives from 3 different manufacturers. Half the time the RAID controller picked up the drive, the other half it just didn't show up. The problem could not be solved, the cable was returned.

Suitable for connecting SAS drives. no data dropout during data transfer. Works with Broadcom/Avago/LSI Mega RAID SAS 9361-8i and Seagate and WD. The best transfer I've had is a 2GB/s compressed data stream without RAID with backups. Average data transfer rate 400-800 MB/s. On average on a RAID 5 I wouldn't say anything wrong with that. I bought some shielded SAS cables but don't see much performance gain.

If you need to connect 6GB drives ==> SAS <== then you need this. I found it too expensive for what it is is, but I needed it fast.