⚡ STETION Circuit Overload Protection - Resettable Solution for Enhanced Safety Review

I have them seen used in some solar installations on youtube and bought two to try. The 60 and 100 amp cases are the same size. They may be well suited for use in audio systems where the currents are dynamic rather than constant (which can result in more heat). For harsh environments, e.g. B. in combination with an inverter in a solar system; for insurance: I'd recommend looking at circuit breakers, which seem to be a lot more reliable in terms of strength and heat resistance. I don't consider…

I have replaced the 30A fuse holder with this one and it keeps blowing. The 30A fuse will not blow under normal use. But this switch works at least half the time. The undeniable sign that it's poorly made is how quickly it works. Most circuit breakers have a trip curve that shows how quickly they trip under certain loads. Exceeding the limit for a very short time will not trigger the normal switch. But it works right out of the box even under the 30 amp rating. So if there is a sudden current…

#1 What the circuit breaker should do is run at its rated current. It's not like this. I connected this 250 amp version to my RV's 2500 watt inverter. I have a 2/0 wire from the battery through this switch to the inverter. In the morning I turn on the 1400w coffee pot and it turns off. At 12.5V it should only be around 120A, my lithium battery handles that pretty well. Even if it bounces around a bit, this should get by without any problems. I have verified that this inverter draws 1375 watts…