🚗 Synergy Manufacturing 8007 Steering Stabilizer: Enhance Your Vehicle's Stability and Control Review

It does exactly what it says on the tin. Fits great and was easy to assemble. The hardest part was tightening the screws. It's not the product's fault, I just need to stop being so weak.

Easy assembly and serves its purpose. Synergy produces quality products, so currently about 60% of suspension parts are manufactured by Synergy, and in the near future there are plans to increase this proportion to 85-90%.

The packaged disc is the wrong ID, but if you have equipment lying around don't worry. Also, the bolt threads are too thick for the left hand mounting hole so I had to drill a bit into the existing tie rod mounting hole. Fun project :).

This item should come with the tie rod bracket if you buy it for over $150 NOT the extra $75. For the price and the inconvenience, I wouldn't recommend it. Buy the entire mount from Artec for less than $75 and have it professionally welded to your Jeep! It's also going to be a lot stronger than that $200 crap.

I wanted the new stabilizer to be out of the way and it was the best price I could see out there and I liked the way it installed became. Fits perfectly. I had no trouble with our 2015 JK moving the stock tie rod mount to where I wanted it. I fitted the housing to the end of the tie rod to maintain tie rod play using the adjuster sleeve on that end.

To say this part is overloaded is an understatement. Thick metal and class 8 screws. Direction is pretty easy if you're mechanically inclined. A note as I didn't see it in the product description - you need at least a 2 1/2 inch stroke. Otherwise the frame will come into contact with the stabilizer bar. A simple fix is to flip the stabilizer bar. Overall very happy with the purchase

After damaging a couple of the steering stabilizers off-road I finally figured it out and bought a conversion kit. Now everything has risen and not gone. This bracket is mandatory along with the Synergy tie rod bracket. While you can use the factory tie rod mount, I had a small dent in the differential when turning all the way left. The Synergy mount is high quality and well worth the extra money. You will not be disappointed. get it right the first time!

What can I say, Synergy is a great company and this product is just what I needed. The instructions were simple and effective. My only disagreement is that the instructions say you can't reverse the stock mount on 2011 and later models. I have 2014 and everything is fine with me. I'm sure Jeep changed the design at some point and the manual hasn't been updated yet. So I recommend checking before you buy to see if yours flip and contain an extra (possibly unnecessary) component.

Quality part. Received it today and installed it with a Fox 2.0 steering stabilizer that fits right into this movement brace. The movement is great as it prevents you from bolting the sway bar directly to the side of the tie rod mount and brings the end of the sway bar outward slightly. I only used one big hole, as I have a Dynatrac PR Unlimited Dana 44 axle cover I'm not sure how it fits the stock D30 or D44. I have a 2013 Jeep JKU with a 3.5" lift, but with this part combined with a Fox 2.0…