Header banner
Revain logoHome Page
๐Ÿ”ต premium wide blue painters tape, 4 inch x 60 yards, 3d printing tape | easy clean removal up to 21 days, masking tape logo

๐Ÿ”ต Premium Wide Blue Painters Tape, 4 inch x 60 Yards, 3D Printing Tape | Easy Clean Removal up to 21 Days, Masking Tape Review

7

ยท

Poor

Revainrating 2 out of 5ย ย 
Ratingย 
2.0
๐Ÿ–Œ๏ธ Painting Supplies & Tools, ๐ŸŽจ Painting Supplies & Wall Treatments

View on AmazonView on ะฏM

Media

(4)
img 1 attached to ๐Ÿ”ต Premium Wide Blue Painters Tape, 4 inch x 60 Yards, 3D Printing Tape | Easy Clean Removal up to 21 Days, Masking Tape
img 2 attached to ๐Ÿ”ต Premium Wide Blue Painters Tape, 4 inch x 60 Yards, 3D Printing Tape | Easy Clean Removal up to 21 Days, Masking Tape
img 3 attached to ๐Ÿ”ต Premium Wide Blue Painters Tape, 4 inch x 60 Yards, 3D Printing Tape | Easy Clean Removal up to 21 Days, Masking Tape
img 4 attached to ๐Ÿ”ต Premium Wide Blue Painters Tape, 4 inch x 60 Yards, 3D Printing Tape | Easy Clean Removal up to 21 Days, Masking Tape

Description of ๐Ÿ”ต Premium Wide Blue Painters Tape, 4 inch x 60 Yards, 3D Printing Tape | Easy Clean Removal up to 21 Days, Masking Tape

Wide Blue Painters Tape - Tapix 3d printer tape is easy to use and remove as well because of its width. The width allows you to put one stripe of tape to cover your print bed instead of cutting and pasting various 1-inch stripes of adhesion tape. For almost all types of the commonly used print bed, only one stripe of Tapix blue tape will be enough to cover your entire printer bed. 3D Printing โ€“ Blue painters tape is the preferred use for 3D printing projects. It is simple, cheap and effective. Using our wide painters tape will make it easy to cover your whole 3D printer bed. By applying blue tape to the print bed, you will be able to remove the 3D print from the bed with ease when done printing. Adhesive - Blue painters tape sticks well to common 3D printing beds. Stripes of tape can be applied to the build platform surface and easily removed or replaced when ready to do a new project. It adheres well to the print bed and leaves no residues behind. Premium Quality Blue Tape - Blue painters tape is strong, flexible, durable, and versatile. Our 3d printer tape is heat resistant so it can withstand up to 190ยฐF/87ยฐC heated beds and the heat of the filament. Painting - Wide Blue Painters Masking Tape is a medium adhesive tape that leaves no damage and sticky residue behind. This tape allows for clean removal up to 21 days. You don't need to worry about taking it off after weeks of your painting job. Our blue tape applies quickly and easily that delivers sharp clean paint lines.

Reviews

Global ratings 7
  • 5
    0
  • 4
    1
  • 3
    2
  • 2
    0
  • 1
    4

Type of review

Revainrating 1 out of 5

Comfortable but leaves a terrible residue

Love the size, easy to dispense but leaves a lot of glue. Try to leave zero stars. It's too late to turn back but it's on me Have seriously spent more time cleaning than painting

Pros
  • Inspires confidence
Cons
  • Definitely a bad product

Revainrating 1 out of 5

terrible adhesion best in paints, wall treatments and accessories

a big difference between the 3M brand and this one. not enough adhesion to be of any use at all. I contacted the seller but he refused to answer. was asked to write a review so I will. 4 inches tall, look for another manufacturer.

Pros
  • Absolutely amazing!
Cons
  • Exchange availability

Revainrating 4 out of 5

Works for 3D printing.

I was lucky enough to use it for 3D printing. The tape adheres well to glass and VERY well to the PETG I print. I will say that it stretches a bit which can cause problems, also not allowing to use it for multiple prints. Make sure you have a good, clean bed before using it.

Pros
  • Easy to read control panel
Cons
  • High price

Revainrating 3 out of 5

Has it been used before?

Not sure if it has been used or what?!? But the roll was torn inside and dirty around the edges like it had been sitting around in someone's pickup truck for about 6 months. Feels a bit thicker and almost like fabric compared to standard blue 3M tape. Seems to stick to my glass 3D printer table.

Pros
  • Best
Cons
  • Weight

Revainrating 1 out of 5

This band is not a full 4 inches wide!

The product description says it's "4" wide, but it's actually 3.75"! I need exactly 4 inches to cover the boards I laser cut. I doubt it's 60 meters. I have a true 4 inch roll at 60 yards and that roll looks like it's 20-30 yards. This product must state its true dimensions and not mislead the consumer. I thought I would get a deal but not like this. It's not even functional for me. I'll be right back. I bought another one of these from another vendor at Revain and will be copying that reviewโ€ฆ

Pros
  • Absolute Legend
Cons
  • Legacy Model

Revainrating 1 out of 5

Definitely NOT 4 " - Art supplies and tools

Call it what it is...3.75" wide. I bought two different rolls of Revain 4 inch tape. This is in the first photo on the left and in the second photo above. It's a 3.75 inch brand - "the other brand is Madeinusa, really 4". I haven't tested this, but both manufacturers say they are 60 yard rolls. The Madeinusa brand looks thicker and is actually 4 inches wide. Plus, it's $1 cheaper per roll. wide, cheaper duct tape at $1 a roll.

Pros
  • Enjoyable
Cons
  • Somewhat low maintenance

Revainrating 3 out of 5

Not sticky enough/Not tacky enough for 3D printing

If you are going to buy this coating for your 3D printing platforms, my simple advice is don't do it. It's 50/50 when your casts start pulling the tape off the bed. If you get it as plain masking tape, chances are you'll love it. I have printed with it on Ulitmaker, Prusa and Monoprice Cadet. In all cases, my prints adhere well to the ribbon itself about 50% of the time, but then pull the ribbon off the printing platform. Especially on something wider than a few inches. Even if I wipe the bedโ€ฆ

Pros
  • Durable surface
Cons
  • Degraded