🛠️ Upgrade Your Vehicle's Suspension with Timbren DR3500CA Suspension Enhancement System Review

Good product. easy to install. Just take off the old bumpers and put them on. that's all. prevents the truck from lowering too much. used it on 15 rams twice 6.7 cummins. fits right in. makes the truck's suspension stiffer than it was. but that's what you get if you don't want your truck loaded with a trailer to sink.

If you need help with suspension to reduce sag these are great. They do NOT increase the weight you can carry in or on the truck, but they offer a much better ride when fully loaded. I have a 3200 pound finger on my Ram 3500 and it sagged a little more than I wanted. Timbrens solved this problem and the load ride is much better. Does not affect unloaded driving as they have no contact with the axle when unloaded.

I installed these on my truck and this thing jumps everywhere even with a load. It bounces so violently that I had a motorcycle seat belt in my back, snapped two belts and almost lost my bike. I am extremely unimpressed with this product and would advise people using this trailer slide product to look elsewhere. I take them off and hope to sell or return them.

I bought a Timbren system for my 2005 Dodge Ram 3500. I tow a 32 foot long medical trailer on freeways and country roads throughout the western 11 states during wildfire season. . This trailer has an extremely high tongue weight and that would limit my torsion bars. Timbren Springs were easy to install and took less than 30 minutes. My truck now squats less than 2 inches without the use of balance bars. They also do not interfere with the movement of vehicles when empty. I recommend them to…

I mainly move heavy loads, dump trailers, low bed trailers and gooseneck semi-trailers. When driving over bumps, the truck bounced and jerked. I have a rear HD spring with helpers and new shock absorbers, the truck didn't sag, it sat almost exactly. My son put a timbre on his truck because of the sag and said try them they will help. It was straight on a trip to North Carolina with 21,000lb GVW, the rebound is gone and the car drives fine when empty. worth your money. Timbren DR3500CA…

Installed on a 2020 2020 RAM 3500 DRW Mega Cab. Slide in camper is an Arctic Fox 811. With timbre rubber springs installed and the camper loaded the truck Springs not engaged. I just rode tones. This caused jerking when driving the car. I didn't like that I only ran timbre springs and no overdrives. Good product. great quality Really easy to install. Just too much support for my needs. For optimal stability, you need to rely on your springs, not just aftermarket gear. This also applies to…

I installed two timbres on a 2012 Dodge using the gasket that came with it. I didn't notice any difference in the movement of the truck without towing. I have only towed a toy dump truck 5th wheel a short distance so far and this product works exactly as advertised. The truck is very close to the drain with the 5th wheel on the truck. The fifth wheel has a claimed hitch weight of 3090 pounds and I also have a 98 gallon fuel tank that is located at the front of the truck bed. Before the timbre…

I bought them last August. It took longer to remove the old bumpers than to put them on. My springs and g-forces are depleted so they are in contact with my axle all the time, not much but they are in contact. They have actually improved my usual driving style. About a week after installation I loaded 6 pallets (about 500 pounds each) onto a DRW platform on a hillside. The loader put the 3 on the downhill side first, and the truck had almost no sag on that side. When he started loading from the