Header banner
Revain logoHome Page
🔌 tyumen low voltage wire connectors - toolless, quick splice terminals for awg 20-24 wires logo

🔌 TYUMEN Low Voltage Wire Connectors - Toolless, Quick Splice Terminals for AWG 20-24 Wires Review

8

·

Average

Revainrating 4 out of 5  
Rating 
3.8
Electrical Connectors, 💡 Electrical

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔌 TYUMEN Low Voltage Wire Connectors - Toolless, Quick Splice Terminals for AWG 20-24 Wires
img 2 attached to 🔌 TYUMEN Low Voltage Wire Connectors - Toolless, Quick Splice Terminals for AWG 20-24 Wires
img 3 attached to 🔌 TYUMEN Low Voltage Wire Connectors - Toolless, Quick Splice Terminals for AWG 20-24 Wires
img 4 attached to 🔌 TYUMEN Low Voltage Wire Connectors - Toolless, Quick Splice Terminals for AWG 20-24 Wires

Description of 🔌 TYUMEN Low Voltage Wire Connectors - Toolless, Quick Splice Terminals for AWG 20-24 Wires

QUICK WIRE CONNECTOR: no wire-stripping required, the electrical connectors are innovative clasp connection design, eliminating the trouble of stripping, hinging and welding, you just need to d snap the feeds into these connectors, very easy to use. save your time and reduce your error. WIDE APPLICATION: The wire connectors perfect for all vehicle, audio, video, speaker, led strip lights installation and other electrical equipments. It is widely used for various low voltage DC electrical hookups, low-loss in-home. USE THE SUITABLE WIRE: Fits well for 20, 22 and 24 gauge extension cable wire. If you also need the 20, 22 AWG stranded and solid core electrical wires, Please search "Tyumen 20 Gauge Wire", "Tyumen 22 Gauge Wire" on Amazon, that fits well for these wire connectors. Please NOTE: As for 18 gauge wire, not all 18 AWG wires are with exactly the same diameter in the market. These connectors maybe fit for 18 Gauge Wire, or not. SAFE TO USE: Rated voltage 300V, current 0-10A, Operating temperature -40°C~+85°C, fireproof, heat resistant. Made of flame retardant material and high precision brass. If you also need the Power Adapter? Please search "Tyumen Power Adapter 12V 2A [UL Listed]" on Amazon for it. PACKAGE INCLUDES: 12pcs 2 Pin I-Dual Wire Connector Terminal (Not include wire, scissors, pliers). Free from electric shocking danger, slightly waterproof and dust proof, reusable.

Reviews

Global ratings 8
  • 5
    2
  • 4
    3
  • 3
    2
  • 2
    1
  • 1
    0

Type of review

Revainrating 3 out of 5

Not the best choice for cam plugs

They are quite inconvenient to use I didn't like them I mean I might be but I wouldn't buy more if you hit the faucet there is no way around it

Cons
  • Modern

Revainrating 3 out of 5

Will not fit 18 gauge wire schematic connectors.

I had to strip the insulation off the 18 gauge to fit it in the plug. The connector had trouble breaking through the insulation of the 20 gauge wire, so I stripped that too. Which defeats the purpose of using this type of plug, hence 1 star for ease of use.

Cons
  • There is error

Revainrating 2 out of 5

It's junk on cam connectors

I should have known better than to think that this little plastic ball would replace other tried and true connection methods. I tried using them to connect some LED strips. A third of these resulted in circuits that failed on the first try, and in one case the connection caused a short circuit that melted the wires and could start a fire. Garbage.

Cons
  • Upgradeable

Revainrating 5 out of 5

First worked for electrical connectors

Based on multiple reviews these connectors worked great. I plugged in a cordless phone and had to cut the power cord to fit through a hole in my desk. Bought both this and a similar one already attached. First uses this and the phone is connected. I used to use other welders, usually one wire at a time. This is ideal for two-wire conductors such as speakers, etc.

Cons
  • Stock

Revainrating 4 out of 5

Too durable for my needs

I've seen a couple of lever nut connectors but they were much smaller so seemed better to me. I put one on a pair of solid 20 AWG "bell wires". The clasps were difficult to close, but I managed with the help of a small pair of pliers. There will be a lot of rework in this project so I wanted to strip the wires as well. It's really tough and the connector gets damaged from all the prying eyes. I save that for other things.

Cons
  • Negative Present

Revainrating 5 out of 5

Exactly as stated

These are perfect for 18ga butt splicing. a wire that I use in connection with installing low voltage lighting under the shelf with LED lighting. I first started out making automotive connections using crimps and shrink wrap. It worked well, but took a lot of time. these work great. Close it with pliers and you can feel every click as it closes. much quicker and easier and seems to work great - everything lit up when I was done.

Cons
  • Miscellaneous Miscellaneous

Revainrating 4 out of 5

A few tricks and they work great.

I had a little trouble at first, but I figured out a few tricks and they work great. 1. Although it says "no stripping required," I've found that stripping 1/8" at the end increases success, especially with 16 or 18 gauge wire. And use needle nose pliers to get plastic rings with breaking out larger wires. The scissors just didn't work for me. 2. I used pliers to snap the ends shut. At first I was afraid the connector would break, but I found that the tighter the more I got I pressed. None of…

Cons
  • Nothing here

In general, I am satisfied with the functionality and material quality of these connectors. They are difficult to close and latch, but pliers solve this problem and the connectors don't break or snap. I found them difficult to open when intended to be wirelessly latched (and presumably when installed). My use case was installing LEDs in electrical boxes eight feet from the stairs. These connectors proved to be simple, small, and allowed to organize (2) wires for each LED. Snapping the…

Cons
  • A few little things