Header banner
Revain logoHome Page
πŸ”© uniweld g2s 2" x 4" bottom 2-inch by 4-inch logo

πŸ”© Uniweld G2S 2" x 4" Bottom 2-Inch by 4-Inch Review

3

Β·

Average

Revainrating 3.5 out of 5Β Β 
RatingΒ 
3.7
πŸŒ€ Pressure & Vacuum, πŸ” Test, Measure & Inspect

View on AmazonView on Π―M

Media

(3)
img 1 attached to πŸ”© Uniweld G2S 2" x 4" Bottom 2-Inch by 4-Inch
img 2 attached to πŸ”© Uniweld G2S 2" x 4" Bottom 2-Inch by 4-Inch
img 3 attached to πŸ”© Uniweld G2S 2" x 4" Bottom 2-Inch by 4-Inch

Description of πŸ”© Uniweld G2S 2" x 4" Bottom 2-Inch by 4-Inch

2 Inch Gauge, 0-3000 PSI, U.L. Listed, Gold Steel Case. 1/4 Inch NPT Bottom Mount Brass fitting that is corrosion resistant. Oxygen cleaned welding gauge per (A.N.S.I. B40.1). Suitable for use with acetylene. Recommended for use with compressed gas regulators.

Reviews

Global ratings 3
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    1

Type of review

Revainrating 5 out of 5

Ideal for DIY pump or kegarator

Used this sensor to build my own brake bleeder. The red line starting at 15psi is ideal as 15psi is the maximum you should inflate your power pump to. It will also be a great gauge replacement for my kegarator.

Pros
  • Recommended for use with compressed gas regulators.
Cons
  • Slightly dented

Revainrating 5 out of 5

Made in the USA baby! in pressure and vacuum gauges

Next day delivery. Very low price. Made in the USA. Delivered on Sunday. Wow.Gage was delivered as promised. Works perfectly. The body appears to be thicker than usual. or maybe stiffer, but it still feels firmer and heavier than the old one that's being replaced.

Pros
  • Suitable for use with acetylene.
Cons
  • Doubtful

Revainrating 1 out of 5

Poor Accuracy: Gauges

I have now returned 2 of these gauges due to poor accuracy (out of 3). Product descriptions do not indicate accuracy. It must be at least 3% of full scale, which is +/- 0.9 psi. Customs service. The product description refers to the ANSI B40.1 standard, which typically meets the accuracy requirements of 3/2/3% of full scale (3% below 25% of range; 2% at the center of 50% of range; 3% above 25% of range). . At 10psi the sensor I just returned showed 8.6psi (4.7% error). At 30psi the gauge I just

Pros
  • Welding Oxygen Purge Gauge (ANSI B40.1)
Cons
  • Other