🖥️ VIVO Dual VESA Bracket Adapter, Horizontal Mount Assembly for Two Monitor Screens up to 27 inches, MOUNT-VW02A Review

Very easy to put together, few parts. It's extremely durable and holds my two 27 inch monitors in place. It can hold the tilt angle well and has a wide range. The crossbar is slightly curved making it easy to slide the monitors around and adjust the tilt (left/right) so they are always flush in the center 1/2' and rivet and screw the fastener in. There is no quick release for installing or removing monitors from mount but at this price point I would expect.

Don't be the type of guy who leaves bad reviews after abusing products or expecting a $30 product to do the same thing as a $120 one Option. This mount is for identical monitors (or monitors of the same size). I have 2 identical Curved 24" monitors. It is adjustable in 3 dimensions, not 4. You can tilt left, right, up and down. You can adjust it horizontally (left and right). One vertical adjustment (up and down) is NOT possible. You CANNOT adjust it forward or backward. I mounted mine to an…

The product worked as advertised and was everything I wanted. I have 2x 27" monitors that fit perfectly in this mount. I believe the purpose of this product was to mount it to an existing VESA stand/desk mount, but instead I chose to mount it directly to the wall This was done using an 8" x 1" x 6" cut/sanded board that was held screwed 3" x 3" to the post, the mount itself was secured by 4 1/4" deck screws It is held in the board.It creates a strong, sleek and most importantly hidden…

I know this unit is designed to be mounted on a bracket but I needed a simple solution to wall mount two monitors. It works well - it was easy for me to mount it on the wall and easy to assemble. Please note that due to the design of the clip that holds the monitors to the support bar, you can only move the monitors horizontally until the bracket touches the wall. This can prevent you from adjusting your monitors, or worse, damage your wall. I didn't care. I was able to arrange the monitors in…

The mount is only rated for monitors up to 27", but I was able to mount my thin bezel 32" monitors without too much trouble. The only complaint that What I do have about the mount is that I found it to be about an inch shorter than expected, probably due to the curve at the temples.The 32" monitors I've used are almost exactly 14" from the Center of mount to outer rim, so a total of 28 inches center to center, which should leave about 4 inches of total space, or about 2" at each end of the…

Required to wall mount two monitors above an antique desk in our home office. That helped. A few anchor bolts and lots of measurements and I'm a happy camper. For installation I would recommend that you take care to align your mount at the same angle as your desktop. Mine was about 2 degrees off and I had to readjust to get it looking right. Level doesn't matter if your table is uneven. I hope this keeps someone from drilling 3 holes in the wall. I didn't have to use a pad with this product. I…