Efficient Walker Exhaust 35414 Exhaust Clamp for High-Quality Exhaust Systems Review

3 of the 6 bolts I bought broke and they don't tighten enough to compress the tube. I would return but I used 2 of these as hanger mounts and welded them on. They do an excellent job of that.

Not worth the money, breaks easily. I took a chance and snapped both clips (I bought two). Very soft metal. Also, I had to come up with my own washers as the nuts supplied are small 13mm nuts and when tightened they actually push a hole for the threaded rod to go through. Again not a bad product. Take a risk if you want, but don't expect them to be a nice, snug fit on your exhaust pipe unless you have a really thin pipe or need to crush it at all.

Well basically this product is cheap, the nuts aren't big enough to fit properly on the yoke. The nuts get to a point where you can't tighten them because they start to bind. If the nut were bigger it would sit properly on the clamp so you could tighten it enough to actually close the exhaust pipe, but you can't get the pipe to never close. The threads on the Ubolt are weak, even if you could caulk the tube the threads wouldn't withstand the ft-lbs required to caulk. All in all, save yourself a