🔝 WirthCo 32410 Funnel King - 1" Thread Polyethylene Drum Funnel: 3 Quart Capacity, 1” Thread Review

What's a funnel for you ask? This is pouring something into a container or tank without getting your mouth dirty. That's what this funnel is for. It gets most of the liquid into the container, creating a bit of a mess around the opening. I would not recommend using this with oil or anything else that requires environmental cleaning. The funnel leaks where the funnel meets the 2" thread. Looks like it was glued on with Gorilla Glue. Please update your design and advertise this product as a…

Works great as a keg funnel. But the upper funnel is put on the lower adapter. You will need to use thread tape or just smear the top and bottom together to prevent leakage. Also remember to unplug the other keg when using the funnel, otherwise the pressure will build up in the keg until air/fumes escape through the funnel, splashing you in the process. The funnel would have been better if its top funnel screwed into the bottom adapter instead of over it to prevent leakage. Also use the 2 inch…

Absolutely smelly house. The label says it's made from substances known to cause cancer (to Californians who don't seem to care what's in the stuff they buy). I wanted it to fill water jugs - and can't use it for that and shouldn't be sending it back (minus shipping) - so it went in the bin so some Midwest recyclers could contaminate the entire batch. from melted plastic - or sent to an incinerator. If you work somewhere or use this in an application where stench and toxins aren't a concern…

The funnels are a 5 star funnel used to collect water flowing down the sprinkler string into a 55 gallon plastic drum. According to the product description, this is a 3 star description. Which 2 inch thread does it have? I think it has an NPS (National Pipe Straight) thread. But many plastic barrels sold for rain barrels have 2" support threads, so the adapter on this funnel actually goes through the cork to the rain barrel without snapping in. That doesn't matter, because you don't necessarily

Got this and applied it to a 55 gallon drum while pouring gas. "For industrial purposes" it said. There is a seam where the screw base meets the funnel. At the seam, on the inside of the funnel, there is a slight edge that leads to the funnel section. When filling with petrol, a small leak was noticed immediately. I don't know if it was this particular funnel or if they are all like that. The adhesive on my funnel-base junction seems a little weak on leaks but very strong on adhesion. Some of…

I bought a keg funnel because I wanted a funnel with a large threaded opening. The funnel was fine. This is a cheap cast with few surface defects. Injection Molding The tooling used to make the funnel is in pretty bad shape. Inside the funnel is a 3mm 360 degree protrusion. I do not know why. a plain polyethylene funnel and a 2" to 1" NPT thread reducing sleeve. A black plastic fitting is pressed into the bottom of a straight funnel to "thread" it. at the base of a suitable guard, which snags…