🔧 Yonico 14169Q Mortising Router 2 Inch: Enhanced Precision and Versatility Review

This mount worked great with one minor issue. There is a small bushing on the shaft that holds the bearing in place. This yoke has a very small set screw that holds it in place so it can be removed to replace the bearing if necessary. The tiny adjusting screw disappeared at some point the first time I used it. The drill still worked without the set screw but caused vibration when the drill was pushed to speed up the cut. As long as I moved slowly, everything worked perfectly. Overall the bit…

Product cuts great and does what it's supposed to. But it also does something else. Look at picture 2 which shows a groove carved into the wood of my template. After cutting out my loop layout using a stencil, I noticed a groove in my stencil. Upon closer inspection, I noticed that the bolt that was supposed to hold the wheel in place was sticking out of the wheel. It was on both bits I brought (14151q and 14122q). It was an easy fix. I just sanded both (picture 1) flush with the wheel. But QA…

I use this tool to carve a recessed river in a patio table, fill it with a small river rock and then fill it with resin. The beat still cuts well. But after about 1/2 hour of use, the set screw that held the bearing in place (I read this happened in another review) came out. I was really lucky to find the set screw and put it back in to make sure it was tight this time. 2-3 hours of work on the project and the beat still cuts really well. So far cut 8 feet, about 5 inches wide and 3/8 inch…