ZERAY Carbon Clipless Road Bike Pedals With Cleats Compatible With Look Keo For Peloton And Road Cycling Review

This review is for the Zp112There is nothing wrong witt these pedals, the problem I have is with the description. There is a lot of bravado in cycling advertising, but make not mistake, you are getting an inexpensive pedal, not the lightest and greatest product. They are INJECTION MOLDED PLASTIC, not carbon fiber. They weigh 5 ounces, which for a look Keo pedal, you probably cannot find one that is heavier.

Lasted about 3 days. Unfortunately only now just installed them after getting for Christmas. Installed them with the proper recommended torque. After 3 days of use, left pedal pulled right out of the shaft as I was riding. Nearly broke my ankle as I lost balance and went to the ground and my right foot didn’t release from the clip.Definitely would not recommend. 2nd set of pedals I got through ebay that broke after short use with near dire consequences. Won’t be purchasing pedals from here ever

Well these pedals are very excellent for the price. If you are planning on cycling super serious I'd invest in name brand pedals, but thats just me. I grind hard (I've broken a few chains) and these pedals have held up to the power I put down. I assume the bad reviews regarding the pedals bending is because the riders were much heavier. If you are under 200lbs these pedals can take abuse like any other pedals. Overall the quality for the price is perfect. Highly suggest.

Excellent value for money. I've put about 1000mi/1600km on them without any reliability issues. However, the value vs. quality tradeoff manifests in 3 areas: 1) brushing up against the sharp, angular finish will cut the skin your calf or shin. Be careful. 2) I use 9-degree Keo cleats, in these pedals, give play nowhere near 9 degrees. 3) The clip spring adjustment between left and right is very different.

The pedals are good, except that I learned the hard way that the screws on the bottom of the shoes need to be tightened before every ride. I took a soft fall off my bike because I couldn’t disconnect from the pedal due to there being too much play in the shoes. I also lost a screw, though the company replaced it at no cost. But once I realized that the screws needed to be tightened before each and every ride, there’s been no problems.

Installed on my wife’s new road bike as alternative to more expensive ones as she is a new cycler. They look great, seem well made and durable, no clipping issues or broken parts after 4 months of avid use! Great product for the price! Highly recommend!

Awesome pedals the clips went right onto the shoes. Only thing was the screws weren’t long enough to use with washers but clipped and unclipped a lot at red lights highly recommend for the value

Cleat screws are too small for my shoe. Click in, hold, click out!!What more could you ask.... Didn’t come with tools to install on the bike. It is light and comfortable

Pedals were fine for the first 3 rides of about 25 miles per ride. On the 4th ride I felt my left foot slipping/moving a little and thought it was just my shoe during the ride. Actually it was the pedals that was slowly stripping out of the crank arm. About 20 miles into the ride I look down the pedal is not on the crank, it is stuck on the bottom of my shoe. Crank was totally stripped and the crank arm will have to be replaced. Bike was professionally built by a bike shop so hard to believe…

AMAZON IS SO EASY TO DEAL WITH AND I PREFER SHOPPING ON AMAZON . On somethings the delivery date sucks . Overall I would give you great review .

I love the product. I got it for a great price from ebay Warehouse deals. The installation instructions were easy to follow and the process was almost painless. Unfortunately there is a washer missing, some of the parts were loose inside the ebay package. Not sure if it fell out or whatnot, but I can not find one washer. I will reach out to the company to get another one.

For decades I've been a "foot loop" pedal, mountain bike guy, so these were my first experience with clip in's on a road bike. Price is awesome for carbon fiber, I've been using these everyday since October. 2 Weeks ago I started to hear this annoying "clunk" on one of the pedals/crank/? at the same spot of the rotation. I found others on ebay have had this same issue. After evaluating, I found these 2 little allen screws (each with it's own size) on the front part/right/left side, of the pedal

Super impressed with these pedals. Work great with my old cletes that are on current shoes and I have had no issues with them. I do think there is a little more play in them compared to my previous Power Taps, which worries me on climbs and such, but no once has my shoe come out and clipping in/out is a breeze.

I have out about 200 miles on these pedals - at first they were stiff and didn’t rotate freely but now they seem fine and are holding up well. As good as a $150 set of Shimano - no, but they do the job and a good budget option.

I was looking to buy a new set of pedals and clips for this biking season and came across these in my search. They are great and the price was much more affordable than others. They are similar to LOOK pedals but half the price and shipped fast. Light weight, well built, and easy to install. I am very happy with them!

Nice pedals for the money. Easy to clip in and out of. Bearings a little stiff at first and that makes them not be in their correct position for clipping in.

Pedals are great. Cleats that come with it are no good. Cleats were to this for the front screw. Bought me a different set of cleats and all is well. Otherwise I would give Zeray a five star review

Pretty easy to install. I wish they would include the hex wrench so you don’t ha be to buy it. I would buy this. Again They are not durable.

These are very smooth, lightweight, and clips in and out easily. Only complaint is thatI wish they had some float. Nice though!

Just to be clear, LOOK CLEATS DO NOT work with these pedals; BUT the CLEATS provided do. All you do is simply change cleats which takes 5 to 10 mins. Also you need an 8 Allen Hex Wrench for installation of the pedals. Other than that I have been use them for two days now and love them; I use them in my spin bike.