ALPHA MOTO Flywheel Puller Yamaha Warrior YFM 350 400 660 700 R EX250 X Raptor - 35mm M35x1.5RH (Video Demo) - Enhanced SEO Review

Works well. I would avoid the shiny tools sold everywhere as they will damage the crankshaft and destroy themselves. This tool Grrrreat!

The tool worked great after I added some from another puller to take some space to make the short center screw. The bolt was about an inch or so shorter and didn't even make contact with the crank.

Ordered this to pull some flywheels on a 350 Yamaha Warrior, works as described, even used a 1/2 Milwauke High Torque Kick and it didn't break or anything else. quality tool

2 seconds after I started to pull back the flywheel from my 1999 350 Warrior the threads on the inside of the puller completely snapped and left not to use the puller

Great tool does exactly what it is supposed to do and arrived quickly. 2 days. I got it on the second day. Just like I always do on Amazon. A tool is absolutely necessary to remove the flywheel from the shaft. Really durable, you have to crank it up and it does a good job.

Good tool set, but thread end is too soft and breaks under pressure. I put a good quality lubricant on the bolt and end of the crankshaft. The hub was very tight and was putting a lot of pressure on the threaded shaft, I'm not sure why that happened. Must be hardened at the end but otherwise it works