🎨 DeVilbiss 802343 Auto Painting/Priming Kit: Unleash Your Painting Skills with Precision and Efficiency Review

ordered 2 different sets of guns for the starting line, both came with caps that don't stay on the cups, the gun tip is 90 degrees and the caps fall off. new caps and also the 1.8 injector treatment looks like it hasn't been properly finished. I know they are made in Taiwan but also the port shipping and their quality control will check if the cap stays in place. I think for the money the quality should be there, keep up the good work and you will want to be in control of the product you are…

I bought these shotguns as an upgrade to a silver harbor shotgun with a purple grip and spray cap. The port gun is an exact copy, the tips and needles are identical. For $50 I could buy two HF pistols. It was $156. I'm by no means a professional painter, but I've had good results on motorcycles and some trucks. In my opinion, these pistols squirt no better and no worse than the KV. They cost 3 times as much, but the result is no better. They are made in Korea, not in the USA. I feel like I just

The gun didn't spray the paint well. I found that the small vent in the plastic top was not clean, a flaw in the molding process. I cleared the vent and now the gun works. I checked the second top and it had the same problem. This caused extra work and made things worse as I had to sand down the rough surface of the orange peel before I could continue. After fixing the problem, I've had good results by spraying black dupli color paint and then clear, 30psi from a 1.5 tip gun. and rod. Shotguns…

They were as good as I expected. I'm new to drawing and still need to get used to it a bit. Guns say 30psi max. You can't even spray close. I ended up spraying with 1.8 primer. had to lower it to 18psi for it to be right. The quality is excellent, I like the controller. Once you've attached the regulator to the weapon, you can't go back to the body. I don't really want to remove the slider every time, so I just won't remove it. Many people have told me to spray with a fan and wide open. With…

When I first ordered the case was sealed well but the guns had poor quality control. they look dirty and used. so i'm ordering. The seller sent a replacement order and again the quality control of the guns was poor, a little better but not by much. I used them once and then cleaned them. 4 months later I used the primer gun again and finally got material out of the nozzle on the hood which I poured. the base/clear pistol also broke after a few months. $30 port guns are probably better than this

So far this has been the best "value for money" shotgun I've experimented with. In my opinion the best thing about these guns that sets them apart from others in their price range is the solid base of the paint shell. Every other gun I've tried has ended up breaking right at the neck, or twisting, bending, or being bent, right over the threads in the gun. I tend to hit the cup's plastic lid when I put it back on and it doesn't budge. The only really annoying thing about it was that the thinner…

4 stars simply because of the price, what you get and above all what was expected (I had low expectations). Basically I got this for primer shotcrete and it was pretty good. The spray pattern was a bit inconsistent, but that's why I used it as a primer. It can be sanded during preparation. Be careful with cups! My first primer mix resulted in the metal cup breaking at the joint and paint spilling all over it. Luckily I wasn't over the parts when it happened. I only used one of the guns and put…