Header banner
Revain logoHome Page
🔧 optimized fastening tools: knives, screws, and tactics fastener logo

🔧 Optimized Fastening Tools: Knives, Screws, and Tactics Fastener Review

7

·

Terrible

Revainrating 1.5 out of 5  
Rating 
1.6
🔩 Rivets, 🔩 Fasteners

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔧 Optimized Fastening Tools: Knives, Screws, and Tactics Fastener
img 2 attached to 🔧 Optimized Fastening Tools: Knives, Screws, and Tactics Fastener
img 3 attached to 🔧 Optimized Fastening Tools: Knives, Screws, and Tactics Fastener
img 4 attached to 🔧 Optimized Fastening Tools: Knives, Screws, and Tactics Fastener

Description of 🔧 Optimized Fastening Tools: Knives, Screws, and Tactics Fastener

Material:360 free machining brass,durable and antirust. Size:each fastener is 25mm(1") long screwed closed, the outside diameter of the shaft is 4mm(0.157") and the outside diameter of the head is 6mm(0.236"). Great option for natural handle materials like bone or horn, that may swell or shrink with changes in humidity or temperature. Fastener slot can be sanded off when finishing, to create the appearance of solid handle pins. you can get 10sets (Screw & Stud).

Reviews

Global ratings 7
  • 5
    0
  • 4
    0
  • 3
    2
  • 2
    0
  • 1
    5

Type of review

Revainrating 1 out of 5

Pure garbage! Don't waste your $$

Pure 100% junk! The screwdriver slot is just a scratch, so don't tighten it. I doubt they are brass and most likely metal softer than a banana.

Pros
  • nice thing
Cons
  • Doubtful purchase for the elderly

Revainrating 3 out of 5

Half of it unthreaded

Made in China. Questionable quality control. Half of me didn't connect, so my project didn't have enough. Tried different ends and none fit.

Pros
  • Good product for the price
Cons
  • Quality

Revainrating 1 out of 5

Better than pins, wrong size ends

They work, better than pins. Keep in mind that you will need to drill two holes in the center or buy a step drill which I couldn't find. I have a problem is that the two ends are slightly different. One side is 5.98mm and the other is 5.83mm (see picture), the difference is enough for the 15/64" drill to fit the side with the screw, but the threaded side will not fit without clogging. The 1/4" drill bit is too big and will leave a gap around the screw.

Pros
  • Satisfied
Cons
  • Negative present

Revainrating 3 out of 5

Very disappointed in blind rivets

Most of the screws were either missing a screwdriver slot completely or were so flat that you couldn't use them. I had to either make slots or deepen them on a bandsaw. If I hadn't needed them for the knives back then, I would have returned them for a refund.

Pros
  • Blind rivets
Cons
  • Slightly torn

Revainrating 1 out of 5

Color differences between orders

My first order was perfect - just like the picture (matte brass finish to the right of the picture). The second order came just a few weeks later, from the same company, and they were shiny brass that looked very cheap. In fact, they looked like brass plated chrome parts. I sanded one of them hoping the inner color would be matte, but it wasn't. Maybe someday they'll be useful to me, but hardly ever. Now I don't know if I should order them again to get the ones I want.

Pros
  • rivets
Cons
  • old

Revainrating 1 out of 5

Hollow Head Garbage

If I could I would give it zero stars. After grinding the handle to size and cutting off a small piece of these bolts, a cord was exposed which was completely hollow leaving a large hole in the handles of the knives I'm trying to make. The only solution was to try to weld an empty gap, which seemed to work, but now my custom knife looks like junk because I'm using it in place of something I bought from one of the knife making sites. I would give zero stars if I could. . After grinding the…

Pros
  • Clasps
Cons
  • Exorbitant Price