KVIZTY 8 Gauge Silicone Wire【25ft Red】- Super Flexible 8 AWG Automotive 🔴 Cable, 1650 Strands, 0.08mm Stranded Tinned Copper Conductor, 8.3mm² Size, High Temperature 200℃/392℉ 600V Review

Use this to install amplifiers and other accessories. The wire is thick with a good covering. It had good flexibility, making it easy to route in hard-to-reach places. For this price it is good value and I will buy it again. Hope that helps.

If you are looking for a flexible AWG 8 this is it. It costs about the same as regular AWG 8. It's much more flexible than regular AWG 14. It's flexible because the wires are very thin, so be careful when stripping or cutting them. I think the silicone based insulation also adds to the flexibility.

This wire has a tinned copper strand and is very flexible. It looks and feels like a quality product. I mainly use wires to build high current lithium polymer batteries. I can probably get away with 10 gauge wires, but I chose 8 gauge thinking it would be cheap insurance against overheating. It works well.

Super flexible, high quality tinned copper wire! 10 gauge wire is great for heavier loads when assembling small electronics. The flexibility makes this method extremely easy to use and allows you to wrap around tight corners without fear of the protective material tearing or splintering. In my opinion this is the best stranded wire you can use. It is highly recommended to use silicone screen wire if you have never used one before.

This is a very good and super flexible cable, ideal for heated 3D printer tables, which offers maximum flexibility to give the Z axis as little resistance as possible when moving. I replaced the stock Zip 12awg cable with this silicone cable and it has proven to be much better and better quality for my 3D printer so far. The flexibility of this cable is incredible and the strands are pure tinned copper making it the perfect cable for my application.

Nice silicone wire. Easy to solder and very flexible, ideal for RC and other hobbies. The insulation is a silicone material and resists heat well. The cable is rated for 600V and is suitable for high current DC wiring. I measured the low resistance from one end of the wire to the connector I soldered it to and overall I have no complaints about these coils of wire. Very happy with this 10 gauge silicone wire.

It's hard to tell from the pictures but yes it's tinned copper in hairy threads. The wire jacket is easy to cut and provides good protection for the wire as it has a slight deflection and repulsion (springy). It's probably best to wear gloves as it would be easy to get a metal splinter. The metal core and wire jacket are crimped as desired. It's amazing how flexible the cable is. Probably not what you are used to. Returns the shape when released. You can see that one cable is bent and the other

Everything that says in the info. The length is 25 feet and can be 2 inches longer. Core diameter is 3.0mm which is approximately 7mm², approximate wire cross sectional area is 10 AWG. The outer diameter is 5 mm. conductivity is good. May have claimed over 1000 skeins. There are many wires, thin or thinner hairs collected in several larger strands. When stripping, some of them may inevitably come off. The wire is extremely flexible compared to solid core wires and wires with thicker braided…

I work a lot with 12V solar panels and 120VAC inverters. I primarily use 12AWG wire for 12V DC connections, but there are times when I need a larger gauge for higher current applications. This includes connecting batteries to 300W or 500W inverters where the current is more demanding than 12 AWG can safely operate. Since my inverters are relatively weak, I don't necessarily need a welding cable for the connections. That's where this 10AWG cable comes to the rescue. What I like Packaging without