🖌️ TCP Global - 3 Gun Gravity Feed Paint Triple Spray Gun Holder Stand: Bench Mount with Strainer Holder, Holds 3 HVLP Guns Review

Support arms screw in with a nut to secure. The color filter holder rotates into position but is not loose enough to move as you fill the jar with color. The tip is recommended for detailing pistols or cups larger than a quart.

I was thrilled when the mount for my new spray guns finally arrived. Well that's all, it doesn't hold spray guns well, the filter holder is inappropriate due to the angle the guns are in the mount. Update, I reinstalled the block on the corner of the desktop and bent the pins a bit. and now it works as it should. Should be slightly higher to allow air fittings to be attached to spray guns. Mayne, I'll put it on a piece of wood.

As already mentioned, this block is not suitable if your weapon has a regulator. My simple solution was to cut it off the plate and add a 4" piece of square tubing. Then weld everything back so I can mount it on a cabinet or wall. Note the metal rod that needs to be welded to the center of the stand to hold the filter mount. Hope this helps others. Also my child who is learning to weld welded, so there are no pins on the welds :-)