🖨️ 3D Printing Supplies

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Package Dimensions: 7.62 cms (L) x 21.59 cms (W) x 7.62 cms (H). Product Type: Mechanical Components. Package Quantity: 1. Country Of Origin: China.

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

1 KG (approximately 2.20 lbs.) Spool. 3.00mm Filament Diameter (Dimensional Accuracy +/- 0.03mm). PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant. Recommended Extrusion/Nozzle Temperature 180°C - 210°C (356°F - 410°F). Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

2.5kg of 2.85mm ABS 3D printer filament. Filament diameter is 2.85mm +/-0.05, ovality (roundness) is within 4% and weight is 5lb +/- 0.1. Printing temperature range is 220 - 260C. Made in the USA under strict quality standards. Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

【Broad compatibility】 General compatible with most 1.75mm 3D pens and printers , 12 colors, each color 16.4 feet, total 196 feet, beautiful gifts. 【Child safety】 Non-toxic and safe PLA filament.non-irritating and 100% plant-derived. 【Good performance】 The diameter accuracy is up to +/- 0.03mm, making your 3D printing very smooth and easy. 【Smooth…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

1KG (approximately 2.2 lbs) Spool. PETG (Polyethylene Terephthalate Glycol-Modified) 3D Printer Filament Vacuumed Sealed With Desiccant. Recommended Extrusion/Nozzle Temperature 230°C - 260°C (446°F - 500°F). 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm). Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 1.25".

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

1.75mm diameter, HIPS filament, 1 Kg Spool. Diameter Tolerance: 1.75mm: 1.75 +/- 0.1mm. Suggested print temperature ranges from 230°C - 240°C. Compatible with most 3D printer models. Soluble in MG Chemicals cat# 433 or 433C series of d-Limonene for dissolving HIPS support material.

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

PLA Pro Plus filament is an engineering grade thermoplastic specially formulated for increased strength and impact resistance compared to standard PLA. Thorouhly tested and manufactured to deliver superb layer adhesion with superior flexibility which prevents typical brittleness in PLA. 200 gram net weight is the perfect sample size to try out filament…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

24 COLORS PLA FILAMENT- 24 colors PLA filament, 6 of which are glow-in-the-dark filament, total 240 feet. It comes with 6 luminous colors and 18 normal various colors. NON-TOXIC PREMIUM MATERIAL- Eco-friendly PLA Filament: Non- toxic and odourless. It's much safer for kids when drawing their 3d pen. 1.75 MM FILAMENT- Compatible with almost all 1.75 mm…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Package weight :4.5 lbs. Package height :32.8 cm. Package length :11.1 cm. Package width :31.2 cm.

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Material: PLA - Color: Silver, Weight: 1 KG (approximately 2.20 lbs) Spool. PLA has low shrinkage rate, even print larger models perform well. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm). PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant. Top Quality, USA Stock , Shipped By Amazon, Same Day Dispatch, 100% Money Back…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

100% New Compatible. Produces excellent 3D printing results. Making for smoother 3D printing, and fewer extruder nozzle problems. Manufactured to very tight tolerances and a wide extruder temperature range. 33 Vivid colors and options: natural, white, black, blue, green, yellow, pink, purple, orange, gray, brown, gold, etc.

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Extreme high flex MODULUS (6.2 gpa) / twice as stiff as PLA with moderate strain at break (8-10 percent ). High glass temp (TG = 80°c) and very high melt strength and viscosity. Low odor / styrene free solution. Colorfabb_xt is produced with Amphora 3D Polymer from Eastman chemical.

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

1 KG (approximately 2.20 lbs) Spool. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm). PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant. Recommended Extrusion/Nozzle Temperature 180°C - 220°C. Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

3D printer filament (1.75mm diameter, bright green; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility). Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish. Engineered to…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

3D printer filament (1.75mm diameter, red; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility). Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish. Engineered to reduce…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

✦Excellent Use Effect: The model printed with ANYCUBIC resin has very pure and amazing color effects, presenting you a more perfect printed model. ✦High-speed Solidification: The resin can ensure the strength of the molded part without excessive shrinkage, shorten the curing time, and ensure the high precision and smoothness of the printed model…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

✦Excellent Use Effect: The model printed with ANYCUBIC resin has very pure and amazing color effects, presenting you a more perfect printed model. ✦High-speed Solidification: The resin can ensure the strength of the molded part without excessive shrinkage, shorten the curing time, and ensure the high precision and smoothness of the printed model…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

✦Excellent Use Effect: The model printed with ANYCUBIC resin has very pure and amazing color effects, presenting you a more perfect printed model. ✦High-speed Solidification: The resin can ensure the strength of the molded part without excessive shrinkage, shorten the curing time, and ensure the high precision and smoothness of the printed model…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

3D printer filament (1.75mm diameter, brown; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility). Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish. Engineered to reduce…

3 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

3D printer filament (1.75mm diameter, blue; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility). Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish. Engineered to reduce…