Beduan 🚰 Hydraulics, Pneumatics & Plumbing
10 Review
Durable brass construction and a quality copper solenoid. And high quality copper coil, NOT aluminium coil. Port Size : 1" Female NPT , 2W160-15. Voltage: DC 12V. Temperature Range: 41-185°F , Working Pressure: Water/Oil 0-0.5 Mpa ; Air 0-0.7 Mpa. High quality normally closed electric solenoid valve for air ,water or oil.
10 Review
Durable brass construction and a quality copper solenoid. And high quality copper coil, NOT aluminium coil. Port Size : 3/4" Female NPT , 2W160-15. Voltage: DC 12V. Temperature Range: 41-185°F , Working Pressure: Water/Oil 0-0.5 Mpa ; Air 0-0.7 Mpa. High quality normally closed electric solenoid valve for air ,water or oil.
4 Review
Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Size: 1" Barb to 1" NPT Male fitting. Temperatures range from -40 to 160 F. 90-degree elbow for connecting hose to threaded pipe at an angle. Fitting connects to hose on one end and has an NPT male connector on the other.
4 Review
Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Type: 1/2" Female x 1/2" Female thread, near 1" length (exact 27mm), pack of 2. Operating temperature: range from -65 to 250 degrees F. Widely use: Pipe threads are use widely for pipes and easy to replace and install. Durable: It is a good…
Read more about this product
2 Review
Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Tube OD: 1.5 inch, fits 1.5 inch tri-clamp. Fit for all other homebrew stuff sanitary fittings. Easy tighten thumb screw with wing nut. Gift: Buy clamp and get same quantity free silicone gasket.
2 Review
Made of high quality stainless steel, corrosion resistance, ductility at high temperatures, and low magnetic permeability. Bulkhead union coupling for connecting two hoses with the same diameter in a straight run. Temperatures range from -40 to 160 F. The mini-barb ends are push-to-connect and do not require hose clamps. The joint of two openings are…
Read more about this product
2 Review
No tools required, easy to install, quick connect fitting. Mini quick connect push 1/4-Inch tube OD. Standard fitting for water filter systems and RO Water System using 1/4" water filter tubing. Provides a permanent/removable leak-proof connection. Suitable for water and food applications
2 Review
PU Tubing Pipe Material: PU( Polyurethane ). PU Tubing Pipe Size: 3/16" (Inside diameter) , Package Total Length:39.4 Feet (12meters). PU Tubing Pipe Compression-Resistant : 0.8MPa(8.5kgf/cm2); Tensile Stress: 550kg/cm2; Use Range: Pneumatic Tools. Tubing Pipe Working Temperature: -40 -176 °F/-20°C--80°C; Working Pressure: 1Mpa; Burst Pressure: 2.5Mpa…
Read more about this product
1 Review
Body material:Stainless Steel 304. In-line sight glass flow pipe OD:51mm. Ferrule OD:64mm, Fits to 2" tri clamp. Max pressure:120 PSI. Max temperature: 300°F. Sight glass flow indicators provides a full 360 degree to observe fluid flow in any direction. Sanitary sight glasses are designed for sanitary applications used in the food, dairy, and…
Read more about this product
1 Review
Body Style: Air Flow Control Valve. Fluid Type:Air Vacuum (no freezing). Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC. Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR ; Lock Claw:Stainless Steel(SUS) ; Body:Plastic(PET). Working Temperature:0-60°C | 32~140°F ;Negative Pressure:-100Kpa | -29.5 In Hg
1 Review
Body Style: Air Flow Control Valve. Fluid Type:Air Vacuum (no freezing). Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC. Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR ; Lock Claw:Stainless Steel(SUS) ; Body:Plastic(PET). Working Temperature:0-60°C | 32~140°F ;Negative Pressure:-100Kpa | -29.5 In Hg
1 Review
Body Style: Air Flow Control Valve. Fluid Type:Air Vacuum (no freezing). Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC. Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR ; Lock Claw:Stainless Steel(SUS) ; Body:Plastic(PET). Working Temperature:0-60°C | 32~140°F ;Negative Pressure:-100Kpa | -29.5 In Hg
1 Review
Material: Made of 304 stainless steel, strength and resistance to corrosion. This Fitting is 1/4" barb hose, suitable for hose tubing with 1/4" ID (Not for poly pipe). Maximum working pressure of 2800 psi. Temperatures range from -868 to 1472 °F/-500 to 800 °C. Barbed retracting locks for easy slide-back connecting and disconnecting.
1 Review
Type:Push in fitting/Push to connect /Size:1/2 " Tube OD x 1/2" NPT Thread. Fluid Admitted:Air Vacuum Water (no freezing). Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC. Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Nickle-Plated Brass /Body:Nickle-Plated Brass. Working Temperature:0-60°C | 32~140°F/Negative Pressure…
Read more about this product
1 Review
Tube Size:1/8" OD. 3mm OD. Type: Sleeve ferrule. Material: Brass. Corrosion resistance, ductility at high temperatures, and low magnetic permeability. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C). Package Include: 40pcs sleeve ferrules
1 Review
Tube Size:5/16" OD. 8mm OD. Type: Sleeve ferrule. Material: Brass. Corrosion resistance, ductility at high temperatures, and low magnetic permeability. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C). Package Include: 40pcs sleeve ferrules
1 Review
Material: Brass. Connections: 1/2" x 3/8". Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Temperatures range from -40 to 160 F. 150 PSI maximum working pressure. Contains no lead…
Read more about this product
1 Review
Body material:Stainless Steel 304. In-line sight glass flow pipe OD:25mm. Ferrule OD:50.5mm, Fits to 1.5" tri clamp. Max pressure:250 PSI. Max temperature: 300°F. Used to make a fluid start or stop flowing through a section of pipe. The pull style handle allows you to set the valve in four different positions simply by pulling and turning.
1 Review
Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Type: 1/4" Male x 1/4" Male thread. Maximum working pressure of 19MPa/2800 Psi, Temperatures range from -868 to 1472 °F/-500 to 800 °C. 90-degree elbow for changing flow direction between pipes. Fitting connects to same Male thread on both two…
Read more about this product