💡 Network & Cable Testers

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

The laser powered visifault visual fault locator is a cable continuity tester that locates fibers, verifies cable continuity and polarity, diagnose and repair simple fiber link problems and find breaks in cables, connectors, and splices in splice trays and tight fiber bends in and around equipment racks. Includes: Visifault visual fault locator, 2.5…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Replacement self-storing remote #1 for Klein's line of VDV Scout Pro testers. Test continuity on RJ45 and RJ12 voice, data and video connections. Simultaneous testing of video and data cables saves time and improves efficiency.

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Tests Wiring Configurations On Utp & Stp. Checks For Shorts, Miswires, Reversals & Split Pairs. Main Unit & Remote Allow 1-person Testing. Designed To Test Installed Twisted Pair Wiring. Tests Unshielded & Shielded Modular Plugs.

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

For use with the Fluke Networks CableIQ Qualification Tester. Provides for full wiremap testing on twisted pair cabling. Provides easier identification of twisted pair and coaxial connections. Compatible with F-connector (coax) and modular jack (RJ).

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

1. VFL to Check fiber faults, winding,ect. 2. Trace cables with ac interference rejection. 3. Measure cable length and check cable errors. 4. Poe function: identify which pins are providing power and detect how much voltage. 5. Identify telephone cable condition ( tip or ring)/ polarity (anode or cathode).

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

FAR-REACHING DISTANCE: 10mW visual fault locator can output very bright red light, up to 10 KM, and works great to check for old, misplaced cable or any damages inline of the cable. CRASH-PROOF & DUST-PROOF DESIGN: The head of the VFL pen is made of reinforced stainless steel. The body is made of aluminum. Resistant to high impact and prevents ESD damage…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Test for both single-mode and multi-mode cables. Universal Connector - the connector of the detector is compatibly designed for ST, SC, FC interferes both in circle and square shape of different fiber optic cables. Pen design, easy to carry and use,easy to check fiber faults with visual light, Portable and rugged, has always, flash, slow flash 3 modes…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

🔎【Digital cable scanning】NF-8209 lan cable tester is a new generation to offer AC filter and analog signaling all in one network toner and probe. It has three modes for options to track cable like AC filter mode, analog mode and PoE mode. 🔎【Fault distance location】Rj45 cable tester measure cable length and locate fault distance accurately for lan cable…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

The Testboard kit allows NanoVNA users to assemble a useful Component jig to quickly assemble a simple RF circuit and evaluate their performance on the NanoVNA. This test board contains a plug-in test circuit suitable for VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added. This test board kit is used for NanoVNA or other vector…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

The fiber detector use 2.5mm universal connector,which is compatibly designed for ST, SC, FC interfaces,30km detection range,output power stability. It is easy to check fiber faults with visual fault locator, portable and rugged,dust-proof design keep fiber connectors cleaning. The fiber tester with quality laser chip,makes strong red light;aluminum…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

【Smart】HKN Ethernet cable tester has no switch, plug in the network cable and it will automatically start up and run, unplug the network cable and automatically shut down in 5 seconds, avoid forgetting to shut down and run out of battery. 【Application】This network RJ45 Tester is used for testing your homemade Ethernet patch cables such as CAT5, CAT5e…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Visual fault locator is easy to check fiber faults and field test ,portable and rugged,Dust-proof design keep fiber connectors clean. Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. Fiber optical power meter,Seven Calibrated Wavelengths – 850, 980,1300, 1310, 1490…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

1. Trace and locate Rj45 (stp/ 4-core), Rj11, usb, bnc cables without ac current noise. 2. Hub blink for locating network port by the flashing port light on hub/ switch. 3. Measure cable length for Rj45, bnc cable. 4. Check open, short, cross, crosstalk for Rj11, Rj45, bnc cable. 5. Tone tracking short or breakage point. Included Components: Pcb.

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline. Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs. Precise SmartTone technology provides five distinct tones for exact pair…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

【What to use for】The underground wire locator is designed to allow the user to track low voltage cables used for garden and landscape automatic watering systems, and low voltage garden lighting systems. It can also be used to trace other metal cables. Trace and locate underground wires or in-wall wires, the detection depth range is 2 feet and the max…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Main Function: Continuity testing, Length measurement, Cable scan, PoE test, Port flash. Three Scan Modes: Digital mode, Analog mode, PoE mode. It can shield the interference of digital signals without noise which can assist you to locate the line easier. Length Measurement: With TDR, it can be used to measure the length of CAT5 and CAT6 cables and…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

【 PoE Function】 Identify which pins are providing power and detect how much voltage. 【 PING Function】To test network performance, data packet, min & max time. 【 AC Filter 】Tone trace cable with complete AC Interference Rejection. 【 Hub Blink 】Hub blink for locating network port by the flashing port light on Hub / Switch. 【 TF Function】 To import and…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Basic Butt Set handles the most critical requirements. Functions include dial tone, dial out, caller ID, last number redial, on/off hang-up button, flash button, DTM and FSK support. Offers three ways to connect to the line: an RJ11 connector, high quality alligator clips, and a type 66 adapter. Useful for temporary communication. Includes RJ11 to…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

【Main Function-Fault Distance】Measures cable length and display the distance to fault, graphical wire mapping, opens, shorts. 【PoE & PING】PoE: Identify PoE presence and detect how much voltage. PING: To test network performance, data packet, min & max time. 【AC Filter】Tone trace cable with complete AC Interference Rejection, available on common switch &…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Easily complete testing and obtain circuit access on working lines without disrupting service. Clear circuit markings on the sides and bottom of the unit. Use with test set to test line status. Available in standard or in line versions.