💡 Network & Cable Testers

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Aenllosi Hard Carrying Case replacement for Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit. Features: Case is made of supreme quality, durable EVA, crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes. With Internal mesh pocket can store other accessories at your convenience…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

【Multi-Type Cable Scan】Directly tone locate RJ11/RJ45/BNC/USB cable, and metal cable with cable clip. 【Hub Blinks & Polarity】Locating network port by the flashing port light on Hub / Switch. Different flash frequency means the target port you are looking for. Polarity test function measure DC voltage (0.5-60 V). 【Measure Cable Length】Measure lan cable…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Fault finder with tone generator locates open and short circuits, measures cable length, helps isolate individual wire pairs, and detects AC voltage on the line. Works on any two or more conductor cable upto 2,500 feet (762 meters). VOP (velocity of propagation) can be set to match a cable's specifications to optimize the accuracy of fault location and…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

1. Measures Cable length and display the distance to fault. ---2. Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, Shorts. 3. Poe presence: identify which pins are providing power and detect how much voltage.---4. Ping function to test Network performance, data packet, min & max Time. 5. Tone trace Cable with…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

1. Directly hunt 5E, 6E, telephone wire, coaxial cable,USB cable and other cables with 8 remote identifiers,more easy to work. 2. Check wiring error in 5E, 6E, coaxial cable, such as open circuit,short circuit, jumper wire, reverse connection. 3. Locate the wiring or connection error.Measure cable length up to 1000m and locate the breakage point. 4…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

★1310nm+1550nm and 32+30dB★-While testing using an OTDR, the wavelength set on the OTDR should match the wavelength that is used for transmission.SS313T-2A series OTDR provides a wavelength of 1310nm+1550nm and a dynamic range of 32dB+30dB,the max test distance can up to 120km. ★OTDR OPM OLS and VFL★-SKYSHL SS313T-2A combines all essential fiber tests…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Detects dial tone and polarity, places and receives calls, and has a one-way amplified speaker for hands-free listening during testing of telephone lines. DropSafe reliability passes 20-foot drop test. RainSafe protection in severe weather conditions. Stores nine 18-digit numbers in repertory dialer (speed dialing). Polarity indication/Tone and Pulse…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

[IDENTIFY WIRE PAIRS]The wire tracer network identify wire pairs, check continuity & test telephone line polarit. [TRACK THE CABLE OR WIRES]The tracer track the cables or wires,and diagnose the break point. [EASILY TRACE WIRES FROM SOURSE TO TEMINATION]The wire tracer is easily trace wires from sourse to temination. [LEDS SHOWS OPEN OR SHORT CIRCUIT…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Easy to use tool for inserting and extracting fiber optic SC, LC, MU & MTRJ connectors (simplex and duplex) from bulkheads in high density cabinets. Ergonomic and lightweight design promotes precise alignment. Built to last, made out of carbon steel with PVC handles. Designed for professional fiber optic technicians, installers, and engineers. Lifetime…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

1. Check the spring , poi and cross-talk functions for network cable. 2. Hunt the target cable from a bundle of cables , such as Rj11 / Rj45 / banc. 3. Under the situation of connecting Ethernet switches / router to find target cable. 4. Locate the short circuit location for 2 cores cable. 5. Test the Rj11 , Rj45 , banc cable length under open circuit.

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Ultra High Power cable tracing system with 190 mW of output power. Two selectable operating modes continuous or auto power down. Connection choice - RJ-45 to alligator clip, or RJ-45 Patch Cable. Low battery indicator - Signal generator. Power “On” indicator - Probe.

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Locate underground non-energized wires. Range: up to 2 feet deep and 1000 feet in length. Locating alarm, sound and computer wires. Tracking underground, buried wires and other hidden-wires, BUT NOT FOR sprinkle or irrigation valves. Determining which receptacles are on specific circuits. WARNING: Only for single-core or double-core wire, NOT FOR…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Tests CAT3/5e/6/6a ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses. Supports up to 8 testing and ID remotes for network and telephone cables and up to 20 network and coax ID-only mapping remotes. Detects presence of PoE and class of PoE per IEEE 802. 3af/at with load…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Cable Tester for UTP STP RJ45(manual switch). Automatic efficient scan for the miss wiring, disorder cable, open and short circuit. TEL BNC test available(Adapter needed). Remotely test cable up to 1000 ft in length ( remote kit included ). Track the cables or wires, and diagnose the break point.

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Live circuit tracing kit for both 120VAC and 220VAC circuits (250VAC max). The versatile Fox HotWire can generate multiple tones (Pulse or Warble), provides a visual and audible continuity test, and integrates Triplett's own TrueTrace and TripLatch tests. The Hound HotWire is a battery operated handheld lightweight Probe; containing both a thumbwheel…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

【Professional and Multifunctional Tool Kit】This professional and multifunctional tool kit, applicable for network wires ,telephone wires and other electric wires,can help you finish different cable marking processes without effort.Not only can the wire tracker test physical connection status of network cable,such as open circuit,short circuit,positive…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

【High Quality】This tone generator and probe kit is made of high-quality materials, wear-resistant, corrosion-resistant. The gain is normal 30dB, the input impedance is nominal 100M Ohm. Note: the wire tracker needs two 9V batteries(NOT INCLUDED). 【Accurate & Easy】With optional continuous or adjustable generator, the method is simple to use, makes…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Connect in series with any RS-232 interface for testing a serial RS-232 data link. Simple and easy, no oscilloscope is needed. DIP switch can setting disconnect or reconnect any signal, and support external probe test signal from male or female position. 8 double-color (red and green) LEDs indicate the logic states for respective data lines. Green for…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

CABLE MAPPING: Finds and identifies up to 8 COAX cables in main cable boxes using color-coded cable identifiers and tone generation. VERSATILE USE: Perfect for testing cables for CATV, network installations, satellite installations, audio-video equipment, CCTV, and security & alarm installations. BUILT-IN TONE GENERATOR: Easily identifies opens and…

3 Review

🔍 Test, Measure & Inspect, 💡 Network & Cable Testers

Add this optional accessory to a Fluke Networks MicroScanner2 Cable Verifier. Far-end identifiers 2-7 test telephone jacks, Ethernet jacks and CATV outlets right out of the box. Fluke MS2-IDK27 Remote ID Kit included in MS2-KIT may be ordered separately. Country of origin: China.