🌞 Gray Sun Visor for 2007-2011 Toyota Camry & Camry Hybrid with Sunroof and Light - Left Driver Side Review

Before I fixed the second latch the light worked. However, the new metal clip is slightly different from the original hardware and I felt something click as soon as I connected the second cover and now the light doesn't work. I decided not to take it apart again to investigate as something broke during installation. Also it seems to be of good quality and the color matches perfectly.

This was my third sun visor that I have bought and attempted to install. I lost clips on two other products. It was a little easier, but I also had the experience of my other two failures. It looks good and works well. The mirror backlight also works. Very happy with this product. This saved me a lot of money. I wish there were some instructions and tips included but there are several videos on You Tube regarding the installation of this product.

This sun visor fits the original in my 2011 Camry. I tried following the YouTube instructions to "fix" the broken one but finally found a guide for my specific machine. It is replaceable and not repairable. The Toyota dealer charged me $130 to replace the visor so I saved money on the item and am happy with another do-it-yourself repair! Installation is a breeze if you follow the instructions on YouTube. Highly recommended!

Yesterday I installed this new visor on my 2011 Camry SE with sunroof. It didn't have instructions or anything, so I watched a few short YouTube videos and started the process. When you remove the original sun visor, two black metal clips remain in the hole that remains in the roof. Get her out and save her! I've spent 30 minutes unsuccessfully trying to fit a new sun visor using the black metal clips that came with it. Something about those aftermarket clips was just wrong and I couldn't get…

Looks the same as the OEM visor but a lot cheaper. The average DIYer should have no trouble installing them. I will say that you have to be careful with the black metal spring clips. Make sure the old ones are powered off before attempting to install a new sight! A pair of pliers and a gentle hand will help if the old visor hasn't come loose. If necessary, try looking at the old sight after removing it to check the alignment of the clips. Align everything correctly (especially the white plastic

OE quality or better. The materials used are of very good quality. Perfectly matched grey. Looks and feels better than the original visor on my Camry Hybrid 08. All you need is a plastic tool to pry open the plastic cover. Do not remove the plastic cover. Remove just enough to release the metal clips. Then carefully pull out the old visor. After you pull out the old visor, there may be metal clips on it. Using pliers, remove the old metal clips from the old visor. Make sure they don't fall on…

Ordered today, installed next. Can't beat it Even the color matched perfectly. However, this is where it gets a little more complicated. The old visor has already been removed. The new visor came with a new cap and metal clips that hold it in place. In the attached photo, the old metal clip is on the right. The new one (left) is different and won't stay in place. The new lid shown also had different lugs that fit into the metal clips. Trying to slide the new lever assembly into place proved a…