Review on 🔥 Vulkankraft Premium PLA Filament: Exceptional 3D Printing Performance by Eddie Gordon

Every 3D printing enthusiast makes sure that new filament doesn't tangle, holds up well and gives great results when testing new filament. I believe Vulkankraft's Premium PLA Marble Filament hits the mark in all of these categories! It really is an incredibly easy thread to work with, which is always a plus. The coil came well packaged with good tightness. Once I removed the shrink-wrapped protective plastic barrier, I noticed that there was an extra "saran" wrap around the thread, which further increased my overall confidence in their quality control department. After a few small test runs, it was time to print something. it will really benefit from the improved look and feel of PLA marble. We had to go statue! That's why I chose Moai. My print settings were as follows: Printer: PRUSA MK3S+Nozzle: Brass 0.4mm Resolution: 0.2mm printer to place the marble thread. I know that the manufacturer recommends 210°C as the upper range for printing this filament, but I found 215°C to be slightly better at gluing smooth layers in my initial tests compared to 210°C, plus it's generally the de- facto standard or "golden point". PLA. Bed adhesion was strong at every print. Layering was excellent, with barely visible layer ridges on all of my prints. There was no tension; Simply beautiful print for print! The absolute absence of tangles on the reel with excellent stability and quality as evidenced by the photos and videos that I have included in my review. I will be looking at other listings and would highly recommend this brand and PLA marble!