Regular 235/55/17 on XC70, mileage 10-15 per year, operated from 2022 from April to November. Every weekend departure for moderate off-road: a primer, muddy in spring, autumn, after rains, a clay country road. Off-road, it usually behaves like any “summer” all-season on AWD - once you get into a rut, you will row until you sit on your belly. I did not dare to climb into the marshy ground. There were no adventures for the first couple of seasons, then I lost 3 (!) Wheels, the last one in 2022. 1 - side cut from the inside (pothole), welded, lasted a year; 2 - an unsuccessful large diameter puncture on the edge (bend) of the tire: the patch and the harnesses were not held (an artifact on the primer); 3 - side cut outside (border). I had to periodically buy a used one, so I drove it for 7 years, rearranging it back and forth. By the end of the 2022 season absolutely bald tires, went to the trash. It has long been noticed - regular "slippers" from the cabin - always an economical compromise not in favor of consumer properties. Depreciation by the end of season 3 is significant - 80%. On the track, the tires are on fire, I drive fast. It seemed that the maximum safe mileage on it is 40 thousand - no more, although of course a lot depends on the driving style and mode of operation, and the size is important. It can be said that I was not lucky with cuts - punctures, but nothing like this happened to me on the products of other brands that I dealt with - Yokogama, GoodYear, Bridgestone. Lousy Pirelli Scorpion STR and he only caught self-tapping screws, but so that the sidewalls . The less than ideal Hankook DynaPro HP on my other car went bald on the same route, but remained intact. Conclusion: for this money there are more reliable options or at least not worse;)
Hakko T18-BR02 Soldering Tip - T18 Series for Hakko FX-888/FX-8801 - Conical Shape - Bent 30 Degrees - R0.2 mm x 10.5 mm
12 Review
🔥 Tig Pen Rod Holder and Welding Finger Feeder by Dog River Tools - Maximize Your Welding Efficiency with our Feeder Pencil
12 Review
Inverter welding machine CET CET MMA 200A, MMA
23 Review
John Tillman Medium Gold and Pearl Top Grain Split Back Cowhide MIG Welders Gloves - 14" - Fleece Lined with 4" Cuff and Kevlar Stitch - 50 M - Carded
11 Review