Everything is good on this filter holder except for two 1/2" threaded inlets. I had two completely different standard 1/2" zinc plated fittings and both screwed in quite a bit. One was a 1/2" to 1/4" sleeve. Way to the bushing nut rubbing on the filter housing. The other was a 1/ 2" galvanized plug. It leaked even when screwed in so its last few turns were in the filter housing. Luckily there was a flat surface the plug faced and I was able to get an o-ring between the end of the plug and flat surface. This stopped the leak. Perhaps it would be better to get a block with brass inserts for the threaded parts. Use RectorSeal #5 as hose paste.
Hydronix CB 45 2001 Commercial Industrial Activated π§ Water Filter: The Ultimate Solution for Efficient Water Purification
7 Review
Filter under the sink Aquaphor Crystal Eco
62 Review
Filter under the sink Aquaphor Crystal A, 1/2" white
51 Review
π§ Pentek 150467 Blue Housing Pressure: Optimal Solution for Filtering Water
10 Review
NANPU DFR-02 1/4" NPT Air Drying System - Double Air Filters, Air Pressure Regulator Combo - Semi-Auto Drain, Poly Bowl
20 Review
NANPU Air Drying System With Double Filters And Pressure Regulator Combo For Clean And Controlled Air Supply
18 Review
NANPU Compressed Air Filter Regulator Combo: Brass Element, Semi-Auto Drain, 0-150 Psi Gauge, And More
21 Review
NANPU 1/2" NPT Air Drying System - 5 Micron Particulate Filter, 0.01 Micron Coalescing Filter, Air Pressure Regulator Combo - Semi-Auto Drain, Poly Bowl W/Metal Gauge
23 Review