Review on Sawing machine DeWALT DWE7485, 1850 W by Jnis Muinieks ᠌

Its pros: Fairly small and light. The table is flat. Convenient design of a parallel emphasis. Due to the rigid fastening of the stop to the guides, the dimensions are perfectly even. Metal gears and comb. The stock saw blade cuts just fine. Plywood 18 mm, like butter! There are no chips on the back side of the plywood. All devices from the kit (except for the angle stop) have their own place on the saw. In the transport position, nothing sticks out beyond the dimensions of the saw and does not dangle. Convenient riving knife change mechanism. The saw has rubber feet. The saw has handles for carrying. Some cons: Not very convenient adjustment of the angle of inclination of the saw blade. For an accurate angle of 100%, you will need a digital or accurate goniometer. There is no hose to connect the dust extraction from the disc. To connect dust removal from both the disc and the bottom, you need a separate hose and tee, or a vacuum cleaner. The saw is louder than I would like. It is impossible to work without dust removal. Angle stop for non-locking in the 90°, 30° and 45° positions. If you need precise cuts, then it will be difficult to make them without additional equipment. Plus, the backlash when installed in the grooves does not contribute to an accurate cut.