Circular saw BOSCH GKS 190, 1400 W blue/silver Review

There was a choice between Makita HS7601, (there is also an option with a case) 1200 W, Makita 5008MG, 1800 W and BOSCH GKS 190, 1400 W. The first one is rather weak, although it is possible to put it on a tire. The second, Makita 5008, has a lot of dope, but . you can put it under the table (warranty flies), although there is also no possibility of installing at least on a tire + the price is high (11.000 RUR) . The choice fell on the average price scale, wire length, power and depth of cut…

The view from the inside, just when sawing, smoke went out, sparks, then a flash, the plastic guides for the stator winding melted, and they also ground the rotor, at a price of 7 spare parts from 5, therefore, to throw away. Judge for yourself. By the wear of the rotor in the area of ​​​​the brushes, it can be seen that the saw is almost new . a year warranty but it would not help either, they would blame the owner 100%, although the saw is professional and you can saw for 8 hours a day .

They took it as a gift for rare housework, I think that it will completely cope with its tasks for many years. Registered on the site Bosch professional and received an extended warranty for 3 years. messed up and brought a damaged box, otherwise everything is OK. There will be additions, I will write.

Good quality flooring for home non-professional use. Quality build, no backlash. Flat sole, two attachment points is a big plus. Ideal angles are 90 and 45 degrees. Relatively quiet, very smooth operation. It does not heat up during operation, dust removal is normal. The main thing is not to overload. I recommend

Without a certificate (expired certificate) the price should be at least 2 times cheaper! Please understand and give a comment about what I should do - return the goods or what! ?

For me, the choice was very difficult, and after reading reviews about this model and about the beveled plate, I was a little upset. Thought and thought, but still ordered. I examined it for a long time, I did not find any defects. And now, having filed a bunch of different wood materials, I can say with confidence that I was not mistaken in my choice. If you think, then don't think, take it. But of course, when inspecting, pay attention to the 90-degree location of the disk relative to the…

I took for the construction of a house and a summer house, and a fence for manual work to help the end with a pull. Coupon price - a gift, thanks to -market.

but if you do not need accuracy like me, then the circular is just super. Saws quickly, without chips and great effort. The disk included is good (if you don’t cut nails))

Very disappointed in the quality of "Bosh". Apparently I got such an example. Its pros: Power, long cord, cut control through the sole, cut at an angle of 45 Cons below: It stopped turning on after 10 boards and two bars across, I didn’t even have time to build a canopy, while I was working very good impressions and here it is, only the construction began.

My second circular, before that it was black + decker, burned down. I read a lot of reviews about saws in the budget segment, and chose Bosch. Everyone likes the saw, it is an indispensable assistant in household work. 150 timber cut lengthwise? - no problem) )

I sawed a 100mm resinous timber from both sides at full cut, everything is brisk and like clockwork, the main thing is not to overload! )

I bought a disc "construct wood bosch" designed for boards with nails and concrete residues (it was necessary to saw this) - and it’s true, it saws, it doesn’t notice 100 nails. Its pros: powerful, complete with a normal disk, though only 16 teeth, but it cuts smoothly without scuffing. Not very heavy for that kind of power. Cons: not too light for jewelry work, but it is not intended for this

Definitely the best device in its price range. one of the most affordable "blue" Boschs. thanks to various little things (deep cut at an angle, the presence of depth marks, a good sole), work turns into pleasure. Get him before he runs away! ))) Has some pros: powerful. reliable. among classmates for the price - one of the easiest. good wood disc included. the only one in its price category takes 50mm at 45 degrees. made from quality materials. precise adjustment of the depth of cut on the…

Very satisfied. Different pros: Powerful saw, cuts deep, deeper than competitors. With good equipment - clean, smooth, without beats. Another would be a smooth start, so as not to jerk. Satisfied. Has some cons: No. For this price - fire! Well, maybe add a soft start and a groove for the bus. It would be completely out of competition.

The choice was difficult, but the choice is absolutely satisfied. Made very high quality, sawing with a bang. Sawing from door jambs to timber 100. Saw even and clean. Used for over a year, very happy.

There is no additional rigidity added to the saw as a result of its attachment to the sole. It is required to use a caliper to check the parallelism of the disk to the sole and, if necessary, "bend" the rear hinge in order to achieve accurate cutting (precision greater than or equal to +/-1 mm). I'm not sure, maybe I'm being very critical, and perhaps this saw is not intended for use in jewelry work, but I work in the furniture industry, and I require a high level of accuracy. In most cases…

After two meters of cutting an ash board with a thickness of 45 millimeters, the cut started to smoke and shine. It used to build speed, but now all it does is smoke whenever you turn it on. It is a waste to invest seven thousand dollars and then obtain another three thousand for repairs.

Using this saw was a very enjoyable experience for me. I began by sawing blocks and constructing a lattice (also known as a pergola) on the porch on the very first day. The use of a saw can be simplified significantly with the assistance of a number of fundamental tools. Conduct an internet search. Reduce each one to no more than ten minutes, and the time spent toiling away will feel like a breeze in comparison. Has pros: Lightweight, effective, and rather quiet for its power. After working for

It was the first time in my life that I worked with a disk; my experiences were favorable; I sliced a furniture board (planked) like butter and, in principle, evenly (hands are crooked; well, I didn't saw it before); in a nutshell, the disk is an essential accessory for the jigsaw. We need a vacuum cleaner since it makes the dust much more manageable (at times). Because the disk that is included for sawing floorboards and beams, laminate, and thin attractive things is incompatible with the…

I chose between Makita and Bosch, did not lose. I bought it to burn firewood in the garage, and in the summer to build a house in the country. With the first, I coped with a bang, before that I sawed with a jigsaw. These are not conveyable sensations of how quickly it cuts, but the most indiscriminate in thickness (up to 2 cm), whether it be a board or plywood, sometimes hammered together, just sawed in pieces, just to fit into the furnace. Lightweight, as he sawed with one hand and held with…