Sawing machine DeWALT DWE7485, 1850 W Review

Lightweight, high quality machine. Taking it to work with you is the best thing. Powerful, worked with unedged larch (5th) without problems. Laminated plywood (20-ku) did not feel. QS - I thought it was a quick start, it turned out to be a quick brake! Very comfortably. Well built, as expected.

Good tool for home carpentry. Cuts great and clean. The riving knife can be easily changed to a combined one (with protection and chip suction). Excellent parallel guide. In the photo, I circled the handle for changing the riving knife in red - you need to unscrew it a little and pull it towards you. A non-obvious thing, in my opinion.

DeWalt DWE7485-QS F476E I bought through Website dewalt, managers Immediately called back, said that they were already shipping))) delivery 7 days they said, delivered in 2. There is no limit to joy. Great saw!

Different pros: DEWALT DWE7485 43C40 Excellent machine, all corners from the box ideally. Parallel emphasis is just a fairy tale, you can’t imagine better. Although the perpendicular stop dangles, it gives quite a decent angle, for carpentry or construction work it’s not necessary more precisely, for carpentry I will make my own insert and carriage. Different cons: There is no zero liner, I had to make it myself, 2 hours of time, a piece of acacia and a zero liner are ready.

Table saw DEWALT DWE7485 D54F2 It is positioned as a professional instrument, and this is my first instrument of this class. Haven't found any deficiencies yet Accuracy of all settings from the factory Convenience Class

Pros below: Engine power is enough for any work, metal frame, layout, parallel stop, flat table. Cons below: Protractor play in the groove, lack of smooth adjustment of the disc inclination angle, it is difficult to adjust the zero insert.

DeWALT DWE7485 83AC7 Very happy with the purchase! Fully justified the investment! Mobility, precision, convenience all in one!

Long chose and still settled on it. The reviews don't lie at all. I think the price is reasonable for such a machine. Take it, you won't regret it. For a cleaner saw, you can buy a blade with a large number of teeth

The machine is the first of its kind, there is nothing to compare with. But the first experience is positive, which says something. Pros below: The machine is really set up from the factory. I checked all the parameters - everything matches up to a millimeter and a degree. It starts smoothly, quickly and gently cuts, even wet pine. It cuts quite evenly, spread it into slats, compared to the store ones - heaven and earth. Haven't worked with hardwoods yet. Sawdust, as some commentators write, is

DeWALT DWE 7485 0419A I took it as a replacement for an old Soviet machine. Of course heaven and earth. 25 boards cut like clockwork, 50 is already felt like a stretch. The quality is excellent. It is convenient to move as it does not weigh so much. Very satisfied!

Good saw. I read a lot and watched videos. The grip is really comfortable. Everything can be fixed on the machine and transferred.

Out of the box, dead (buzzing) bearings and not always after turning off the brake operation. I used it before buying from a friend, there were no problems, because 4 stars and a service center.

Husband is happy, wanted this thing for a long time. It cuts quickly and accurately, only there is a lot of dust ((but the result is worth it!

With its pros: Affordable, quality workmanship. Most of all, for a hobby. Nice disc included. Factory ready to go. Cons: The protective coating wears off quickly. Picks up a lot of sawdust without a vacuum cleaner. At first, the brushes spark strongly, a soft start is already planned for installation.

Sharing my comprehensive feedback.In general, the mill is excellent, I saw mostly hardwoods Been running for 4 months now with no issues.

I purchased the machine with delivery through the online store. The machine came in its original packaging. The emphasis is a little screw, the table is like an egg, the difference is up to 3mm! What is this anyway? I took it to a service center for diagnosis. Service confirmed will change the table. And this is Dewalt, how so?

DeWALT DWE7485 C6697. I consider myself a very successful purchase. Worth your money for sure. This product is recommended for purchase.

In general, the machine is similar to ideal for traveling work. But, if you need more precision cutting for the workshop, then you need to put in some effort. 1. Modify or remake the carriage. 2. Setting the disc inclination angle takes quite a lot of time. Adjustment of stops of extreme positions 90 and 45 hail. made uncomfortable. Has pros: Many small handy features, about which it is better to look at the reviews on YouTube Cons below: The complete carriage has a lot of backlash, without…

Don't fool me! I had to work with DEWALT table saw from USA! And more than once, but really to work and I was filled with great respect for this saw! A real DEWALT, well, the one with 110 volts is a tool IN ONE WORD! And not some junk from China! So don't make the mistake of wasting your money on the illusion that you are buying a Dewalt. no pics! What is there to photograph then . rubbish .

Some pros: everything is set at the factory. I took it out of the box and checked it - work. Has some cons: a small backlash of the longitudinal stop is treated with a tape sticker.