Review on Mirrycle MTB Mountain Bicycle Mirror by Bob Walters

This mirror was installed on the Sanctuary model of the Schwinn Beach Cruiser. The tip of the rubber handlebar was cut off with a sharp knife. The clean-cut handle ensures a seamless fit between the mirror mount and the handle. Screws are quite difficult to enter metal holes. I would recommend making sure the screw is screwed in straight, otherwise cross-threading will occur and ruin the installation. To do this, insert the screw into the socket and turn counter-clockwise until you hear a click and/or feel the threads of the screw line up with the grooves in the hole, then turn the screw clockwise into the hole . If done correctly, the screw will almost never cross threads. Rear visibility is low, but sufficient to see what's approaching behind the bike and take appropriate action. Adjusting angles are good. Washers are quite small and you will miss them if you are not careful with them. The instructions are pretty simple and easy to understand.